Extrusion assistance ?

[imanut]

I'm looking for a post and panel extrusion pole - this one is 2 x 2 oblong. Rounded on one end, straight on the other side where the panels would be attached. Anyone seen something like this - not a signcomp, mcgill, etc. Not sure if its even made or just a designers "dream".

Thanks for any help.

gn

[boomunch]

I'm looking for a post and panel extrusion pole - this one is 2 x 2 oblong. Rounded on one end, straight on the other side where the panels would be attached. Anyone seen something like this - not a signcomp, mcgill, etc. Not sure if its even made or just a designers "dream".

Thanks for any help.

gn

Charleston Industries has an Er (extended radius) post that may be what you are looking for

[imanut]

?? I went thru their site andcouldn't find anything even remotely close.

[Erik Sine]

Try ABC?

[imanut]

Try ABC?

Yup - and nope.

[Signworksinc]

sounds like my chrome running boards, try a custom truck or bike shop

[aggie81]

APCO has a components division where they sell to the trade. You can get the type of extrusion you describe from them.........but of course it's not cheap. www.apcocomponents.com

[PhillipM]

?? I went thru their site andcouldn't find anything even remotely close.

Did you look at their logo? Isn't it what you are describing? It would be ironic if they didn't have that section!

[imanut]

?? I went thru their site andcouldn't find anything even remotely close.

Did you look at their logo? Isn't it what you are describing? It would be ironic if they didn't have that section!

I went thru all of their extrusions. What I need is an extrusion that is 2" x 2". Rounded on one end making it a 2" diameter round end. The other end is squared off. Which makes it an oblong shape.

[PhillipM]

?? I went thru their site andcouldn't find anything even remotely close.

Did you look at their logo? Isn't it what you are describing? It would be ironic if they didn't have that section!

I went thru all of their extrusions. What I need is an extrusion that is 2" x 2". Rounded on one end making it a 2" diameter round end. The other end is squared off. Which makes it an oblong shape.

See it in their logo? I found it, it's not obvious. Go to cross sections, then 225 series, then scroll down to page 8 and you will find a 225 extended radius post, 2" x 2". I can't directly link it, its a PDF that opens in the page. http://www.cisigns.com/homeset.htm

Edited August 16, 2010 by PhillipM

[imanut]

Damn, that's it !! Thanks much for your time!

gn

[Goatboy]

Just used these last year....Signcomp was where we got them if I remember correctly.

[imanut]

Just used these last year....Signcomp was where we got them if I remember correctly.

Signcomp does not have the extrusion that I described.