Jump to content

ELECTRIC SIGN SUPPLIES

If You're Looking For Premium Electric Sign Industry Components Like Trim Cap, LED's, USHIO LED Lamps, Neon Supplies, or LED Power Supplies, Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!

Buy Now

NATIONAL SIGN & SERVICE COMPANY REVIEW LIST

For Sign Company's Who Work As Subcontractors

Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

You Must Be A Registered Member & A Subcontractor
Click Here

MEMBER LOCATION MAP

Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call? Locate a Supplier or Advertiser Regarding Thier Goods & Services?

Become a Member & Upgrade Your Free Membership So Others Can Locate You
Click Here
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By lights12
      ABSOLUTE SIGN is seeking an experienced sign and lighting technician. Qualified candidates must be knowledgeable in servicing, neon, parking lot lights, LED, fluorescent, diagnosing electrical issues. Electrical sign installation experience a plus. Must be a self-starter and motivated. Must have a California Driver's License. Must have the ability to perform well under pressure. Minimum of 3 years experience in the field. Competitive compensation. Fax your resume to 562-592-6198 or call the office. 562-592-5838. Can start immediately.
    • By Erik Sine
      FLUORESCENT & NEON LAMP TESTER







      A Transco To Go Lamp Tester perfect for use on the field during service calls, or in the shop to test your lamps before installation.



      The Features:

      • Tests Neon (Cold Cathode) Tubes

      • Tests Fluorescent (Hot Cathode) Lamps

      • Tests Mercury, Metal Halide & Sodium Vapor Lamps

      • Telescopic Aerial For Extended Reach

      • Continuity Test & Test Leads

      • Battery Powered



      Lamp Tester Spec Sheet Below For Download:

      TRANSCO Tester File.pdf





      You can now buy this product direct from our online shopping cart by clicking this LINK



      Feel free to contact us to receive a full product & price list , or to order this product - (858) 880-1400 or orders@thesignsyndicate.com

    • By Erik Sine
      So I came across this over the weekend on Sloan LED's Sign Box II and thought I'd post here for anyone interested to kick it around on their spare time. I didn't even have to do much on this one myself but one thing I did see on the Fluorescent side of things is a lot of fumbling around for something that is pretty simple with the simplest kind of knockdown raceway that anyone can just about pick up from their local hardware stores these days. I thought I would finish, or tell the rest of the story not mentioned, and that's what our expected cost would be using one over the other to save in time and what our customer will expect to pay for it.
      The Time Elapsed Video


      The final product with time

      Let's break this down on cost, and cost of operation and take a look at what we just saw and how it relates to our cost, what we will have to sell it for, and what the consumer will have to pay for. Let's just call this a 6' x 5' double sided cabinet.
      MATERIALS SHOP COST
      LIGHT SOURCES (30')
      5) 6' Fluorescent T12 800ma Lamps - $6.04 each x 5 = $30.20
      5) 6' Fluorescent T8 800ma Lamps - $22.00 each x 5 = $110.00 (Long Life Lamps)
      SignBoxII 20' Roll @ $390.54 each x 2 = $781.08
      10' left over, or waste ($195.27)
      LAMP SOCKETS / CLAMPS/BRACKETS
      10) HO Sockets $1.35 each x 10 = $13.50
      Sloan LED's SignBox II LED
      Bag of 16 SignBox Clamps = $21.84
      Brackets $7.62 each x 10 = $76.20
      POWER SUPPLIES
      1) HO Ballast (48' Load) = $62.95
      2) Sloan LED Power Supplies $54.05 each x 2 = $108.10
      POWER
      8 Hours a day, 365 days a year. Annual cost of operation.
      T12 10.7 watts per foot x 30' = 321 watts
      321 watts x 8hours x 365 days x $.12kwh / 1050 power correction = $107.12 annual cost of operation for 8 hours a day
      T8 8.37 watts per foot x 30' = 251.25 watts
      251.25 watts x 8hours x 365 days x $.12kwh / 1050 power correction = $83.84 annual cost of operation for 8 hours a day
      Sloan LED's SignBox II 6 modules per foot @ .9 watts = 5.4 watts/foot x 30 = 162 watts
      162 watts x 8hours x 365 days x $.12kwh / 1050 power correction = $54.06 annual cost of operation for 8 hours a day
      TOTAL SYSTEM COST BEFORE LABOR
      T12 = $106.65
      T8 = $186.45
      Sloan LED's SignBox II = $987.22
      SAVING IN COST OF OPERATION
      Sloan LED's SignBox II vs T12 49% or $53.06 savings using SignBox in annual cost of operation
      Sloan LED's SignBox II vs T8 35% or $29.78 savings using SignBox in annual cost of operation
      MATERIAL COST SAVINGS
      T12 vs Sloan LED's SignBox II = $880.57 89% Saving using a T12 system vs Sloan LED's SignBox II
      T8 vs Sloan LED's SignBox II = $800.77 81% Saving using a T12 system vs Sloan LED's SignBox II
      CONSUMER RETURN ON INVESTMENT USING Sloan LED's SIGNBOX II
      T12 $880.57 Material Cost Saving / $54.06 Cost of Operation = 16.28 Years
      T8 $800.77 Material Cost Saving / $29.78 Cost of Operation = 29.55 Years
      VIDEO SAVING TIME
      26 minutes 34 seconds 1 man labor at Journeyman = $33.00 per hour / 2 1/2 hour = $16.50 saving in labor using SignBoxII
      Now for the question to all of you. How much would you sell that 6'x5' (30sq') double sided cabinet for with simple faces (White with black lettering) as a Fluorescent and as a Sloan LED's SignBox II System fabrication & installation?
      What will your profit margin be?
      As a sign shop are we making money paying for and using a higher cost system? In the amount of time it takes to fabricate a complete sign cabinet are we loosing out on money keeping it conventional which has the lower cost and more proprietary (custom)?
      Now slightly away from this subject an in another subject to think about.
      What's to keep our trade to becoming as a commodity where the consumer can just go to HomeDepot and put their own LED system in where they just peel and stick?
      Now a day even schools have wide format printers, so vinyl and printing aren't really apart of the sign trade anymore. The only thing that's left IMO is sign painting, conventional back-lighting and Neon.
      When it comes to a mom & pop store sign just about anyone now a day can keep up a sheet of plex, anyone can print film, and just about anyone can pick up LEDs from a lighting store. What will keep our industry as a trade and be turned into a commodity which is the direction being pushed by those outside of our trade ? Large sign programs? Are we killing our own trade by not building unique and proprietary signs that does save money for us and the consumer?
      just some thoughts I'd throw out there since so many light source manufacturers are trying to dictate to the sign shop labor and cost and what they should be charging for retrofits like Ventex markets
      Are we soon to be just the middleman, the means for manufacturers to sell their products
    • By Erik Sine
      Final days of our Christmas Special is coming to a close!



      • Toggle Disconnect Switches $3.25 each sold in boxes of 25 + FREE SHIPPING

      • 730-1 Spring snap in button sockets $1.12 each (pack of 50) + FREE SHIPPING

      • 730-2 Stationary snap in button sockets $1.04 each (pack of 50) + FREE SHIPPING

      • 782 Spring snap in tombstone sockets $1.35 each (pack of 50) + FREE SHIPPING

      • 783 Stationary snap in tombstone sockets $1.28 each (pack of 50) + FREE SHIPPING

      • Silicone 14 AWG GTO 250' Roll $129.99 + Shipping

      • Silicone Electrode Caps & Boots $46.00 per 100 + Shipping

      • Lead Free Novaglo Electrodes (100 per box) $42.99 + Shipping

      • Channel Bond Gallon $239.99 + HAZMAT + Shipping

      • Channel Bond & Resin Bond Gallon Combo $292.99 + HAZMAT + Shipping

      • Channel Bond & Resin Bond Quart Combo $96.75 + HAZMAT + Shipping




      Visit our online shopping cart
      http://www.thesignsyndicate.com/forums/index.php?/store/category/24-christmas-deals/





      You can also contact us by phone at (858) 880-1400 or by email orders@thesignsyndicate.com


×
×
  • Create New...