Jump to content

richard2717

Board Member
  • Posts

    61
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by richard2717

  1. Has anyone done work with them recently? Good....Bad? I have them in the system but no jobs are showing ever done for them. They are in MI. Thanks Richard
  2. would let this go for$4k with the software
  3. everything including the software should still be there but I will pull the box tomorrow when I go in to confirm. The only thing that is not there is the computer tower that ran the software. It crashed right before we moved and I never replaced it since we had no room to setup and run the router here.
  4. I will have to look but everything should still be there in the box
  5. I would take $1500 for this if someone can use it. It is new never installed.
  6. Last call before I tear it apart and make a lightweight trailer out of the table. Need the space.
  7. Only the PK housings and tube supports are left. Everything else is gone. I will se;; the case of PK housings for $50 plus shipping
  8. I have a never used copy of the Cyrious software. It was purchased in 2010 and never installed since my partner at the time did not purchase all the modules needed for complete use. Look at the invoice and it will show you what is in included and what is still needed. I emailed Cyrious to make sure it is transferable and they said that it is. I have no use for it. You see what it cost in 2010, make me a reasonable offer. Please email any questions as I can no longer talk by phone due to hearing loss. richard@atlantic-sign.com
  9. Vicki I still have my stud welder for sale in the classifieds if you are looking to do them in house. I am on the eastern shore of MD Thanks Richard
  10. I let both of my guys go and will not be bringing them back on board when they say this is finally over. With what they are paying out on the unemployment side of things here in MD no one is going to want to come back to work and the state will slam me with asinine premium increases to cover the losses like they did back around 08. I have worked every day and plan to continue to. I have modified my business so that I can do everything I take on by myself. I will no longer do national work (other than 2 that have been great so far) since they have all said basically we are not paying you on time if at all. With all that said, not much work is coming in as of late, but with it being just me now, it doesn't take a lot coming in to pay the bills.
  11. Roughly 25 new old stock France 277v magnetic ballasts. I got these in a shop buyout and have no use for them. I suspect no one does at this point but I figured I would offer them up. Make me an offer if interested, They are heavy so shipping would be expensive but will do so on your dime.
  12. Prices plus shipping in lower 48 only Case of 1.75" prewired tube supports $125
  13. Sent you an email last week with no response
  14. Open to offers. Without the cart it is on, Shipping looks to be about $100 east of MS probably a little more west of MS
  15. I would take $3500 for the router without the software
  16. Glad that MC sent that sorry sub agreement when they did. I will never do work for Icon again. I was a little bit upset over losing out on MC work because they sent me a lot that filled in the gaps, but it is surely for the best in this instance
  17. Gerber AR600 6x10 router Has clamp table (not Vacuum) was in working condition and used weekly before we moved. The computer with the software crashed so that would need to be replaced but I have all of the software including Omega and artpath. Only known deficiencies were in the coolant system. One of the adjustable nozzles is broke and there is a slow leak in the tank. Should be repairable but we didn't because we mainly routed plastic and foam with it so coolant was not needed. It is not set up at this time as I have no rook to do so. We downsized several years go with the intent to build a new room here at the new shop that will probably never happen. Asking $7k but open to reasonable offers
  18. I have an older stud welder for sale. Have not used it full time for a couple years since I downsized. I pulled it out the other day and fired it up to make sure everything was still in working order. There are some random new studs and parts that can go with it as well as the cart if local pickup. Asking $800 plus shipping if needed.
  19. I am on the other side of the fence on this. I lost my hearing about 8 years ago, so as an owner I would be up S*** creek without the ability to "talk" digitally. I also get annoyed with the plain jane emails that have no info but want price, but I will most generally ask them once for details and if no good response I just delete the chain and move on. One other thing I like about email is that it can cover your AZZ in stead of "that is not what I said on the phone". Just my perspective Richard
  20. Who is currently licensed to build Best western signs? I have one that has a small face with the printed perferated vinyl on the channel face that needs remade Thanks Richard
  21. Switched all of my insurance to Donegal. Better coverage than what I had with Nationwide and about 1/2 cheaper. My W/C comes out weekly based on my actual payroll so there is never a chance to be hit with a huge audit owed. I still have to give them audited figures at the end of each year but so far they have sent me a check both years. I also get 10% back from my W/C if I have no claims.
  22. I had an old SkyJacker boom that had a manual valve plumbed directly into the main line for the boom up Cylinder. Without it it would slingshot you out of the basket. It also had a stainless steel hose clamp around the handle of it and a pc. of flat bar that was attached to the framework so the valve handle could not tighten or loosen from the vibration of using the unit. I dont see why you couldn't do the same thing with the rotation. It the output of the rotation box is chain drive like my old Versalift you might also be able to change sprocket sizes and adjust the chain to change the gear reduction some. Richard
×
  • Create New...