Pricing on neon items

[johnhz3]

I have the opportunity to get my hands on the following used items. What is the general consensus of what I should be paying? They are used but all in working condition. Thanks!!!

1= 15KVA BOMBARDER.

1= KVA SUPER CHOKE WITH CONTROLER.

1= MAXI-VAC MXV-50.

1= VTOTT TORR GAUGE.

1= VL542 TEMP GAUGE.

1= VDP DIFFUSER PUMP.

1= VWVP VACUUM PUMP.

1= N0.14(160LPM) VH14 HYVAC PUMP.

1= QY300 AC MILLIAMMETER GAGE SET.

EXTRA TABLES AND "BURN IN STATION".

SEVERAL HAND TORCHS AND MIXING VALVES.

2= VRB24 RIBBON BURNERS ON STANDS.

2= 790-JC CROSS FIRE BURNERS ON STANDS.

1= PAGE 228 OF THE GLANTZ CATALOG, THE BENDING STATION & BOMBARDING/PUMPING STATION.

[imanut]

I have the opportunity to get my hands on the following used items. What is the general consensus of what I should be paying? They are used but all in working condition. Thanks!!!

1= 15KVA BOMBARDER.

1= KVA SUPER CHOKE WITH CONTROLER.

1= MAXI-VAC MXV-50.

1= VTOTT TORR GAUGE.

1= VL542 TEMP GAUGE.

1= VDP DIFFUSER PUMP.

1= VWVP VACUUM PUMP.

1= N0.14(160LPM) VH14 HYVAC PUMP.

1= QY300 AC MILLIAMMETER GAGE SET.

EXTRA TABLES AND "BURN IN STATION".

SEVERAL HAND TORCHS AND MIXING VALVES.

2= VRB24 RIBBON BURNERS ON STANDS.

2= 790-JC CROSS FIRE BURNERS ON STANDS.

1= PAGE 228 OF THE GLANTZ CATALOG, THE BENDING STATION & BOMBARDING/PUMPING STATION.

My first question is how much is the one page from the Glantz Catalog?

There probably would NOT be a consensus of price. But from what you list - it appears that most, if not all, is EGL brand? If you buy for less than $10k you did good. If you buy for less than $5K - you stole it. If its less than that - you should refuse it because its way too good of a deal.

[PhillipM]

I have the opportunity to get my hands on the following used items. What is the general consensus of what I should be paying? They are used but all in working condition. Thanks!!!

1= 15KVA BOMBARDER.

1= KVA SUPER CHOKE WITH CONTROLER.

1= MAXI-VAC MXV-50.

1= VTOTT TORR GAUGE.

1= VL542 TEMP GAUGE.

1= VDP DIFFUSER PUMP.

1= VWVP VACUUM PUMP.

1= N0.14(160LPM) VH14 HYVAC PUMP.

1= QY300 AC MILLIAMMETER GAGE SET.

EXTRA TABLES AND "BURN IN STATION".

SEVERAL HAND TORCHS AND MIXING VALVES.

2= VRB24 RIBBON BURNERS ON STANDS.

2= 790-JC CROSS FIRE BURNERS ON STANDS.

1= PAGE 228 OF THE GLANTZ CATALOG, THE BENDING STATION & BOMBARDING/PUMPING STATION.

My first question is how much is the one page from the Glantz Catalog?

There probably would NOT be a consensus of price. But from what you list - it appears that most, if not all, is EGL brand? If you buy for less than $10k you did good. If you buy for less than $5K - you stole it. If its less than that - you should refuse it because its way too good of a deal.

I wouldn't say under $5k is too good a deal in an industry that is drying up. As more and more plants come on the market and the demand for neon goes down so will the price. The cost of new is meaningless in this market.

[saneon]

I'm sure that a city as large as LA still has a pretty large need for a good neon source. The neon repair work alone should keep a tube bender pretty busy and make it worth the investment provided you have the training and experience needed to set up and use the equiptment.

I think a good starting offer would be $5000 and i probably would'nt go over $7500