Classifieds Latest Topics

For Sale: 2023 SDS Automation ChannelTrimmer - Like New, Low Use

Tue, 17 Mar 2026 16:54:11 +0000

If you’re looking to upgrade your channel letter production workflow, this 2023 SDS Automation ChannelTrimmer® is an exceptional find. It’s in like-new condition, has very minimal hours, and is fully operational. Perfect for shops looking to improve efficiency, accuracy, and production speed.

Key Features & Capabilities

Automated trim cap processing system designed for precision and consistent output
Automatic outside corner notching
Marking inside corners for perfect alignment
Eight angle notching tools (45°–120°), creating sharp, clean edges on every letter
Measures all distances with remarkable accuracy for consistent fabrication
Works with industry-standard 150' coil cassettes
Compatible with all channel letter benders, not just SDS ChannelBender® units
Designed to increase productivity and reduce labor time

Condition

Like new — purchased in 2023
Extremely low use
Fully tested and works perfectly
Clean, well-maintained, and ready for production

Technical Specs

Power: 220VAC, 15A, 50/60Hz
System Dimensions: 63" W × 26.75" D × 53.25" H
Supported coil heights: 1", 1.5", 2"
Material thickness: Up to 0.04" (1.0 mm)

Asking Price

$38,000 (negotiable)

Shipping / Pickup

Located in St. George, UT
Buyer responsible for freight (I can assist with arranging shipping if needed)
Loading help available

ACCU-BEND ACCU-CLINCH CHANNEL LETTER BENDER: MODEL 925

Fri, 21 Apr 2023 18:40:35 +0000

Serial No: 006355-189-1008

Year: 2008

36" x 48" work area

Machine is located in Richmond, VA

Priced to sell: $5500

Shipping available at buyer's expense.

Accu Clinch Video.html

Large Format HP Printer (CQ305A) For Sale

Wed, 14 Aug 2024 21:57:40 +0000

Printer will need technician servicing to get running since it has been inactive for approximately 1 year, but otherwise has no reported issues.

Below is the product description from the website for the product:

https://www.hp.com/us-en/shop/pdp/hp-designjet-t770-24-in-printer

Asking price is $150. Shipping not included, if required. We are located in Los Alamitos, CA.

call or email if you have any questions

phone: 562-592-5838

email: support@absolutesign.com

Large Format Epson SC-S40600 Printer for Sale

Wed, 14 Aug 2024 21:54:24 +0000

Printer will need technician servicing to get running since it has been inactive for approximately 1 year, but otherwise has no reported issues. Required cords are included.

Below is the product description from the website for the product.

https://epson.com/For-Work/Printers/Large-Format/Epson-SureColor-S40600-Printer/p/SCS40600PE

Asking price is $3,500 OBO. Shipping not included, if required. We are located in Los Alamitos, CA.

call or email if you have any questions

phone: 562-592-5838

email: support@absolutesign.com

100 10' Transframe TF-60 and connectors

Fri, 12 Jan 2024 13:57:50 +0000

I have 100 aluminum frames manufactured by Metro Signs. These units expand to 10' x 3' triangles and fold down for space saving storage and transport. They can be connected together.

These retail at $70/linear foot.

Entire lot, $9,500. Individual units, $200/each.

Length: 10’ sections
Width: from 3’
Weight: 4 lbs. per linear foot
Configurations: Vertical, horizontal, & three-sided pyramid
Retracted dimension: 4” x 4” x 4” by length
Easy lock-together, quick-snap extruded connectors
Accepts baseplates in upright position

https://www.1-metro.com/TF-60

WANTED - 1 3/8" punch

Fri, 14 Jun 2019 19:45:21 +0000

No, this isn't a for sale post, but I figured it should go here.

I'm in the market for a 1- 3/8" round punch for chasing light sockets. I have the one with "wings" and these are removable and so do the job, but not well. It leaves a rough edge where the wings used to be. I have an extra "D" socket punch to trade and or can do cash. I've been getting more requests for reworking theater marquees and would like a good punch. I used to have one but it must have gotten lost somewhere along the line.

Thanks all!

Gerber Advantage 600 for sale

Fri, 16 Feb 2024 18:07:31 +0000

We are getting a New CNC. Need to make room!!

We have had a Gerber Advantage 600 since 2018. We were the second owners of it. It was fully upgraded in 2015 by CNC Experts w/high performance stepper motor driver, belts, motors, and gearboxes. When I bought it, CNC Experts came here to help us set it up.

All works very well, except the Vacuum Hold-down motor went bad. The table has "T-Slots" and we have the holders that work in those slots.

Looking to move it ASAP. Willing to part it out (Spindles, Spindle Controller, Gerber Gantry Controller, etc.) if not one wants it all. IF you are still using one of these, here are some nice back up pieces for you. We have no set price in mind so make me an offer.

Please email me at plyda@isignaffects.com with interest and we will see what can be done.

2005 International 4300 55ft bucket truck. 44000 miles. needs nothing but a new owner.

Tue, 27 Jun 2023 12:16:56 +0000

55 ft platform height. This truck is being used regularly. It's ready to go to work for you. We just got it back from Mirk rebuilding the boom cylinders. All records available since we've had the truck. All tires are like new. Cold A/C. This truck has an insulated boom, but we didn't need to have that certification for our use, so it hasn't been tested for that since we've had it. $77,500 OBO
NOTE: Generator and ladders shown in pics do not sell with the truck.

CALL 330.224.0210 for more info or email PaulM@LetterGraphicsInc.com

Gerber Precision 200 - working CNC router $2900.00 OBO

Tue, 27 Jun 2023 15:09:34 +0000

Gerber Router approximately 47" x 40" work area. Router is working fine. Call or email with any questions.

Call 330.683.3903 and ask for Chris or email to ChrisB@LetterGraphicsInc.com

20230627_104347.mp4

Vacuum Former: Sign Manufacturing

Mon, 08 May 2023 19:48:20 +0000

For Sale: 8'x10' vacuum former.

Everything works, we just don't use it as we have bigger formers that we typically use. All hydraulics and heating elements are operational.

Priced to sell at $5,000;

Machine is located in DePere, WI (54115)

Any questions on this machine or a number of the other items we have for sale, please contact Jason at Jones Sign Company . (920)-278-5004

. (920)-278-5004

The Bulb Eater - Fluorescent Lamp Crusher For Sale

Fri, 07 Aug 2020 20:10:50 +0000

The Bulb Eater®

Quick Facts

· Crushes straight lamps of any length

· Crushes u-tube lamps (model VRS-U only)

· Crushes a 4-foot fluorescent lamp in 1 second

· Reduce labor by up to 20 hours per 1,000 lamps

· Save up to 50% on recycling costs

· Minimize storage space by up to 80% with lamp crusher

· The most fun you can have disposing of lamps!

Did You Know?

· Awarded "Top 100 Product" by Buildings Magazine

· Named Reader’s Choice “Product of the Year” by Today's Facility Manager Magazine See all awards »

· Seen on the cover of The Wall Street Journal

· Currently nearly 8,000 Bulb Eaters in use worldwide

· New CFL Crushing Model now available! Call for more

Bulb_Eaters_Premium_Owner's_Manual_2-20-15.pdf

2015 Elliot Boom Truck

Wed, 03 May 2023 17:21:51 +0000

This Elliot is on an International 4300 with a Cummings 2350 B101 Diesel engine and Allanson automatic transmission. It has 71,782 miles and has been serviced as required sing the day we bought it new in 2016. The dropbox link has a few pictures https://www.dropbox.com/sh/uupwbrfuwjwqxe6/AAC5jr-PFU8h-z96mKeZonpNa?dl=0

$138,000.00

1764979077_ElliottL60R_Spec_Brochure.pdf

Fasti Model 215-40-4 Folder: Priced to Sell

Fri, 21 Apr 2023 17:41:37 +0000

For Sale: Fasti 215-40-4 Folder

Year: 1995

Asking: $28,000

Full Back Guage

Power: 5-Ton

Capacity 40x40x4mm

220V, 15A

Machine currently located in Tijuana, MX. Can be moved to San Diego, CA.

829668119_FastiVideo2.mp4 383496228_FASTIVIDEO.mp4

STREET WRAP™ FLEX BACK-BEND: Commercial Quality Flexible LED Lighting

Thu, 13 Apr 2023 19:29:59 +0000

Street Wrap is a flexible back bend LED lighting track. This is professional sign quality indoor/outdoor LED track lighting. We have a number of brand-new sections available for sale ranging from 7' to 30' in length. Street cost is approximately $40/ft. Available now for $10/Ft. Please feel free to reach out with any questions. More information can be found at

https://www.p-led.com/products/street-wrap-flex-back-bend/

Street-Wrap-Flex-Side-Bend-Datasheet.pdf Street-Wrap-Flex-Side-Bend-Datasheet.pdf Street-Wrap-Flex-Side-Bend-Instructions-Guide.pdf

ACCUBEND 410 Letter Bending Machine

Fri, 03 Mar 2023 21:26:44 +0000

We are upgrading our letter bending equipment and have this 2009 letter bending machine for sale. Comes complete as shown with manual. $10,000 obo
Contact Mike Weitz mike@weitzsign.com

Accu-Bend Model 26 Channel Letter Bending Machine for sale

Thu, 09 Mar 2023 15:50:00 +0000

Upgrading our letter bending equipment and we have this 2022 machine for sale. Please contact Mike Weitz for more information. mike@weitzsign.com

Gerber AR600 router table

Sat, 06 Jul 2019 13:20:08 +0000

Gerber AR600 6x10 router
Has clamp table (not Vacuum) was in working condition and used weekly before we moved. The computer with the software crashed so that would need to be replaced but I have all of the software including Omega and artpath. Only known deficiencies were in the coolant system. One of the adjustable nozzles is broke and there is a slow leak in the tank. Should be repairable but we didn't because we mainly routed plastic and foam with it so coolant was not needed. It is not set up at this time as I have no rook to do so. We downsized several years go with the intent to build a new room here at the new shop that will probably never happen. Asking $7k but open to reasonable offers

Clear 3/16" polycarbonate various sheet sizes

Fri, 02 Sep 2022 14:15:58 +0000

A while back we had to do part of a bank debranding and had to order white polycarbonate panels for blank faces. Well, I ordered them all from my plastic suppliers website. When the door on the delivery truck opened up I nearly fainted. I had ordered clear from thier website by mistake! Argggggg! To err is human, but to really screw up requires a computer - or an idiot using a computer! ?

Anyway, I have brand new, clear polycarbonate pieces cut from roll stock (Tuffak SL brand). All are, of course, cut to particular sizes to fit that job. They range from 72 3/4" x 96 1/4" down to 35 3/4" x 59 3/4". There are 15 pieces in all, mainly 6x8 (nominal) sheets. I can provide the full list on request. No shipping of them. $4/SF at whatever the nominal size is, picked up from my shop in 08109 (Pennsauken NJ). I.E. that smaller size mentioned above will be called a 3' x 5' sheet. Cash preferred, but will take a company check. They have been stored inside the shop since brought and are either in my material rack or flat up against a wall. In other words the sheets are in really good condition with no warps, etc. I will consider a reasonable offer for the whote lot (total cost new was $2500+ also I did use one of the 4' sheets), but lowballers will be fed to my daughters viscous attack bunny! ?

I hope someone can use some of these. I need the space in my material racks for a big shipment of aluminum.

Sign Business For Sale Houston Area

Mon, 20 Jun 2022 15:59:42 +0000

I have taken another carer path, I have owned this company the past 12 years, I am looking to sell it to another in the industry.

We also have an E Commerce Site that is going live soon.

If interested call me (Seven One Three - 301-0007) Adam www.intrepidsigns.com

Major Equipment:

Roland vs540 Eco solvent printer
Suma 54-in plotter
Jet Mounter 54” laminator
Hand crank laminator/applicator
Four Computer workstations
16ft Lowboy trailer
Dewalt 60gal air compressor
Champion Generator Welder with 50ft leads
Briggs & Straton Auger with 6 & 10 blades with 1ft extension
36” Stomp Shear
2004 International Bucket Truck VST 5000I 50ft 2 man basket with material handler
2 qty Corner Rounders
Hole Punch
Grommet Machine
Two quantity 8 ft straight edge cutters
4 work tables
Big squeegees
Circular Saw
Track Saw
Hammer Drill
Assortment of hand tools squeegees single double-sided tape etc
Two quantity vinyl racks on wheels with Inventory 25

Mimaki JV33-160 for parts, and 9 ink cartridges

Wed, 06 Oct 2021 20:17:16 +0000

We have a JV33-160 for sale for parts, or if you want to fix, it's a good running machine, been a work horse since 2011. The print head is bad on it, so we are opting to upgrade to a new machine.

We also have 9 brand new ink cartridges (compatible, not Mimaki ink) that would go with the machine, or for sale with out the machine.

I hate to just send it to the junk yard, in case someone here may need other parts off the machine for theirs.

Please reach out with any questions. Located in Wisconsin.

Thanks for looking!

Original Saw Model 3579-20M 208V 3 Phase w/ 20’ of in/out feed table that we are looking to sell

Fri, 26 Mar 2021 13:56:13 +0000

We have an Original Saw Model 3579-20M 208V 3 Phase w/ 20’ of in/out feed table that we are looking to sell. The saw is was purchased in 2019 and is a beast. We're selling because we upgraded to an Elumatic up cut saw.

We had purchased from Mid-Atlantic Machinery for $18K, but would sell for $12K.

Pics and literature attached

Steel-Cutting-Radial-Arm-Saw-3579-20M.pdf

Cyrious software

Tue, 25 Aug 2020 16:22:33 +0000

I have a never used copy of the Cyrious software. It was purchased in 2010 and never installed since my partner at the time did not purchase all the modules needed for complete use. Look at the invoice and it will show you what is in included and what is still needed. I emailed Cyrious to make sure it is transferable and they said that it is. I have no use for it. You see what it cost in 2010, make me a reasonable offer. Please email any questions as I can no longer talk by phone due to hearing loss. richard@atlantic-sign.com

Direct Color Systems 1024 UV MVP UV-LED Printer

Fri, 07 Aug 2020 19:49:18 +0000

For Sale Direct Color Systems 1024 UV MVP UV-LED Printer. The print head was replaced 10/20/2019. The capping station was replaced 11/27/2019. This machine is in good working order.

OVERVIEW

Options of IR2 or F4 Edition and 4," 6," and 15" height
F4 Edition Able to print on garments
Printable area up to 10" x 24" (254mm x 610mm)
Fully adjustable heights to accommodate different substrate thicknesses
Print on wood, metals, ceramic tiles, plastics, glass, industrial parts, promotional products and so much more!
Bulk Ink System™ allows for 100% utilization of ink
White Ink Circulation System is programmable and automatic circulation of the entire white ink tank and lines
ACS™ UV print head anti-cure system
LCD touch display provides on-demand printer status and ink levels
Precision Dot Control™ provides industry-leading print quality
UV-LED inks offer outstanding solvent and abrasion durability - with a six color ink set (C,M,Y,K,C,G)
Produce ADA compliant Braille signage using Patented technology

direct_color_systems_uv_led_ada_braille_printing_brochure.pdf jpp_MVP.pdf

2000 Chevrolet C6500 Utility truck for sale

Wed, 09 Dec 2020 18:07:13 +0000

Approximately 200K miles, Cat diesel, 3126B 7.2L, Allison auto Trans, Cruise control, radio, A/C, runs good. No longer able to register in CA . Notify Mike Durfee at Capitol Neon, 916-349-1800 for more information. Price is negotiable.

All Channel Letter Manufacturing Equipment.

Mon, 09 Nov 2020 22:12:15 +0000

All equipment to manufacture channel letters. Accubend will bend .040 to .063 aluminum from 2" to 8" tall material. Works great no problems. Has the accu-clinch to lock all letters together and also have a small clincher for the little letters. all metal table need to go have magnets for trim capping. Mathews paint system with scale and shaker. 2 CNC router run with Mach software one is a 4'x8' table with vacuum table and other is a 74" x 125" table. HP 335 latex printer and laminator. 60" Graphtec plotter. design computer mac. Lots of vinyl and paper for patterns. All equipment ready to go to work. Remove from my shop and install at yours and ready. Equipment is still under power to check operation. $125,00.00 OBO Also have a skyhook HD 64' crane Low miles on 1994 f-700 diesel truck the truck in front for sale. $18,000.00 OBO. Call with any questions 505-350-4845 Louis