By Erik Sine
Well the ship has landed.
To compliment our High-End BrightON LED Module Line we brought in nothing but the best when it comes to LED Power Supplies, hence France Lighting Solutions.
For those that don't know, the France LED power supplies are True Power, which means they are 100% Loadable. No more loading a LED power supply to 80% or 85% to be on the safe side....well...I take that back you had to underload for the PS to survive. These....France PS's are 100% Loadable!
We've been stocking the 24V for some time for our 24V BrightON, but since we also have 12V BrightON LED modules we brought in 12V versions as well.
We also have the new France Atlas 12V 120W (Dual 60W Channel) units, which are IP68, Wet Location (no need for a PS box) and have onboard LED Lamps for displaying trouble shooting, normal/overload use.
France has always been know for their High Performance Neon Transformer Products, the France Lighting Solutions Eco & Atlas LED Power Supplies are no different.
The France Lighting Solutions LED Power Supplies can be purchased from our Store or feel free to call your order in (858) 880-1400 | firstname.lastname@example.org
By Erik Sine
The BrightON-II LED .vs The Principal Qwik Mod 2 LED
So....we've been getting lot's questions on how our New High-End BrightON II LED compares to The "New" High Efficient Principal Qwik Mod 2 LED
Well, we did a quick "side by side" benchmark comparison to find out.
They have some basic similarities.
• .8 watt modules
• Both 170˙/175+ Optics
• Both have Aluminum PCB
We compared both LED modules and placed them in 24" x 4.5" x 5" channels using a standard Plexiglas MC white #7328 white acrylic face to simulate a wide channel letter stroke . Modules spaced 6" OC from one another and 3" from the channel walls.
Now to find out what the differences are...
Once we lit the channel compartments one big difference was the white appearance of each light source.
The Principal Qwik Mod produces more of a yellow white illumination on the sign face, whereas the BrightON II is more of a True White. The pictures here may not do justice as it's hard to capture Real Time and Real Life along with how your display may be calibrated.
Both BrightON II & Principals's Qwik Mod are .8w modules....The BrightON II is 24V LED module, the Qwik Mod is 12V LED module.
24V means half the current flowing through the system of a 12V system, which translates to lesser heat, lesser resistance than a 12V system. A 24V system is more reliable and a longer life system over time for the very reasons I stated.
A 24V system allows you to use a larger single watt channel PSU (96w). The BrightON LED system uses the France Lighting Solutions "True Power" LED Drivers to complete the system, "True Power" means users are able to load the PSU to 100%, where as other LED PSU's are recommended not to go beyond 85% of the rating. A full load 96W France PSU can load 120 BrightON II LED modules. France Lighting Solutions LED Drivers are the only Drivers to date that are 100% loadable.
With a 12V system a single channel 60W LED PSU is typically loaded at 85% or 51W of a 60W unit, or 63 Qwik Mods. You can load more modules on a single unit but you would have to be looking at using a 120W PSU that is a dual 60W channel unit.
Right away the biggest take away from this LED comparison in the image below is the Sign Face Surface light output results in Foot Candles using a ExTech Light Meter measuring the High's and Low's in the 7" x 4" rectangle area of the acrylic face.
The BrightON II has a Foot Candle Average of 209 versus Principal's Qwik Mod coming in lower at 171 Foot Candles.
A HUGE difference which will play big in lighting and in life is how the current is driving across each module. The BrightON II is of course Constant Current, NOT Constant Voltage. The Qwik Mod is Constant Voltage.
The quickest, simplest explanation and differences is this. On a Constant Current system, each module has a current regulator chip which means each module is current regulated, and protected not to overdrive and create more heat and run hotter. The first module on a Constant Current string is equally as bright as the last module on a string....the result is consistent lighting. If you've ever paid attention to the light testing we have been doing on The Sign Syndicate since 2009', you would know that the best and lowest light degradation or Lumen Maintenance results always came from CC LED systems, Constant Voltage or "Eco" Modules not so much.
In a CV System you better hope your LED PSU is not driving above the intended voltage of 12 volts. A slight increase in a fraction of a volt... say...12.2V can kill a LED system fast depending on the makeup of the Modules. When we did our Light Testing "The Great White Hope" we had a incident where a LED PSU operating at 12.25 was used on a Permlight "El Plato Module which was CV and in under 30 days the original output dropped 30%. We had to kick out the PSU and start over with another string of EL Plato's using a manual adjustable LED PSU to assure not to go above 12V.
On a typical CV System on long runs the first module will be brighter than the last module on the same string, inconsistent lighting, with a not well regulated LED PSU CV LED will tend to run hotter and brighter in some areas causing a shorter life. The system is solely dependent on the module resistors for protection.
Constant Voltage = Lesser LED life over time
Constant Current = Longer LED life over time
Below.....you can take what you want from this part...
We used equal underexposed shots from both LED light sources from a Canon SLR Camera instead of Real Time to show our audience where the optics is transferring light
We used a lighting angle chart that we created, made up of 1" grids just to help in displaying where the optics and throwing light. Both Module have wide angle optics, I would just say that the Brighton II throws more light towards the edge of the chart and a little higher up the middle.
What It All Means
In closing, the biggest differences that can be taken away from this benchmark comparison and what separates the BrightON II are a couple of big factors.
• The BrightON 24 volt system which has half the amperage, heat, & resistance than the 12 volt Principal Qwik Mod LED system. You're also able to load more LED modules on a 24V system than a 12 volt system
• If you're looking for a more "Purer" white light source, better bin, then the BrightON LED Module family is for you.
• More light for less power on the sign surface....better chip efficiency... that was just displayed and shown in Foot Candles....BrightON II 209 FC over Principal Qwik Mod 2 171 FC
• Probably the single most important factor? The BrightON LED Family is Constant Current rather than a lower costing system that uses unregulated current in Constant Voltage. What that means for user is....Longer Consistent Life Over Time
The New BrightON LED
The previous High-End BrightON LED version has had a lot of success since the launch. What is new? Only some miner changes were made to make a already superior LED module even better. Same high efficient chip, improved 6500 Kelvin, different optics.
Not that we needed it but, the BrightON is, and has always been underdriven but....we changed from a Fiberglas PCB Board to Aluminum. Aluminum provides better thermal cooling, but again, it wasn't needed....it's just nice to brag about it and say we have Aluminum.
The New BrightON LED Family will in stock by early May 2021.
The BrightON LEDs can now be purchased from our our online store HERE, or you can order over the phone (858) 880-1400 | email@example.com
By Erik Sine
Most LED MFG's will just suggest layouts and tell you how many LEDs per foot without telling you how their LEDs will match up against the Standard Lighting in our industry which is Fluorescent HO Lamps. If you haven't done any lighting for cabinets or never noticed, most fall short of even meeting the luminance that Fluorescent lamps give out on a sign face.
The light that falls short is known as "Usable Light", or light that just gets you there. It's not Competitive lighting that you would need if your sign I located in a shopping center in competition with other signs looking to be noticed.
So here we have our new BrightON II....
The conventional Fluorescent HO (800ma High Output) Lamp light output is the standard in the Electric Sign Industry. When loaded, configured, and installed correct with no cross talk, these lamps and ballasts are a VERY good light source that last for years.
Our High Efficient High-End BrightON IV HO LED modules match the light output of Fluorescent HO lamps of our longtime Electric Sign Standards in lighting applications. More Light for Lesser Power
The Brighton IV LED is Constant Current, uses a High Efficient chip for illumination, mounted on a Aluminum PCB for better thermal cooling...not that we need Aluminum for a chip that is already under driven and produces less heat & resistance due to operating on a 24V System.
With the BrightON IV you'll save money in project costs over buying specialized proprietary channels/bars (Another reason for a sale) by simply purchasing some right angle aluminum channels for the top and bottom of a sign cabinet, and placing aluminum tubing in between to mount your High-End low cost BrightON IV LEDs on.
Double Face Sign Test Cabinet
4’ x 4’ x 12” D
Module to face 5”
Sign Face 3/16” Plexiglas MC White #7328
Fluorescent HO Lamp System
Lamps in single and double faces cabinet fabrication typically are spaced 12” OC (On Center)
Sign Face Luminance: 156.5 Foot Candles
Power Consumption: 126 Watts
Double Face Sign Cabinet Spacing. 8” OC Module to Module, 12” OC Between Rows for Module to Sign Face in depths of 5” or 3”
5” Module to Sign Face Luminance: 156.5 Foot Candles
3.5” Module to Sign Face Luminance: 164 Foot Candles
Power Consumption: 76.8 Watts
126 Watts - 76.8 Watts = 39% Savings in Energy Consumption
Single Face Spacing Suggestions
5” Depth, 9” - 9.5” spacing between rows, 7.5” - 8.5” spacing between modules
3” Depth, 8” - 9” spacing between rows, 8” - 9” spacing between modules
BrightON IV Usable Light Spacing
If you want and need "Usable Light", here it is...some cases call for it. This lighting would be slightly brighter than Hanley's NRG4.
Double Face Sign Cabinet Spacing. 9.5” OC Module to Module, 12” OC Between Rows for Module to Sign Face in depths of 5” or 3”
Sign Face Luminance: 134.5 Foot Candles
Power Consumption: 64 Watts
126 Watts - 76.8 Watts = 49% Savings in Energy Consumption
Why use the BrightON IV LED?
• For starters it's Constant Current unlike using Principal LED's Constant Voltage Qwik Mods or others. Constant Current means each module is current regulated with translates to longer life.
• It's a 24 Volt system, which means our system has half the current running through the wiring and board which translates to half the heat & resistance of a 12 volt system. In other words....Longer Life.
• With a 24V system you're able to use more LED modules on a single 96W channel over a 60W channel.
BrightON IV Aspects
24V High Performance, High Brightness LED Module Half the Amperage, Less Heat & Resistance than a 12V LED Module Aluminum PCB 40 Modules Per Bag 32.5’ (Full Stretch) 1.23 Modules Per Foot Constant Current Regulated, NOT Constant Voltage 175˙ High Efficiency Uniformity Optics 5 year, 50K Lifetime U.L. File E520387
For Inquiries or Orders you can contact us at (858) 880-1400 | firstname.lastname@example.org | order through our online Shopping Cart below
It's been some time since we've stocked Toggle Switches so....we're now stocking Toggle Switches.
We just brought in a bunch of switches after numerous requests and thought we would also throw a special together for this very announcement.
Box of 25 France Lighting Solutions Toggle Switches for $103.75 or $4.15 each and FREE SHIPPING anywhere in the Continental U.S. Call in or Email for special Flat Rate for Hawaii & Alaska
FRANCE LIGHTING SOLUTIONS
UL879 Recognized Component Wet, Damp, & Dry Location 20 Amp - 120-277 VAC - 2HP 12" Lead Wires Silicone Boot On-Off Faceplate 1/2" Panel Opening Per UL48 - 20 Amp VAC Rated Switches are Limited to a Total Transformer Load of 10 Amps
Members can take advantage of this special and purchase using our Online Shopping Cart, or you're more than welcome to email us at email@example.com or phone in at (858) 880-1400
By Erik Sine
Thought I would give everyone an advance preview of our BrightON LED Nano.
Our New Nano Module for all your micro Sign Projects such as mini Channel Letters, Halo Letters and Mini Lighting.
Our BrightON II LED Modules already are an amazing high efficiency Module, now it's just been Nano Sized!!
Check out those Micro Optics!
- 175 Deg High Efficiency Super Optics
- U.L. File E520387
- 150Lm/w - WoW!!
- Constant Current
The Light Spread on these Nano's is Amazing, I can't even tell you how excited we are......I'll have some pics of that light spread soon!
YES, this Nano LED Module is CONSTANT CURRENT
Recently Browsing 0 members
No registered users viewing this page.