Clear 3/16" polycarbonate various sheet sizes

[Rocco]

A while back we had to do part of a bank debranding and had to order white polycarbonate panels for blank faces.   Well, I ordered them all from my plastic suppliers website.   When the door on the delivery truck opened up I nearly fainted.   I had ordered clear from thier website by mistake!   Argggggg!   To err is human, but to really screw up requires a computer - or an idiot using a computer!   ?  

 

Anyway, I have brand new, clear polycarbonate pieces cut from roll stock (Tuffak SL brand).  All are, of course, cut to particular sizes to fit that job.   They range from 72 3/4" x 96 1/4" down to 35 3/4" x 59 3/4".  There are 15 pieces in all, mainly 6x8 (nominal) sheets.    I can provide the full list on request.   No shipping of them.  $4/SF at whatever the nominal size is, picked up from my shop in 08109 (Pennsauken NJ).   I.E. that smaller size mentioned above will be called a 3' x 5' sheet.  Cash preferred, but will take a company check.  They have been stored inside the shop since brought and are either in my material rack or flat up against a wall.   In other words the sheets are in really good condition with no warps, etc.   I will consider a reasonable offer for the whote lot (total cost new was $2500+ also I did use one of the 4' sheets), but lowballers will be fed to my daughters viscous attack bunny!   ? 

 

I hope someone can use some of these.   I need the space in my material racks for a big shipment of aluminum. 

[plyda]

Can you just paint or flood the back with white vinyl and still use? 

[Rocco]

I have a local spray sub (we haven't sprayed in-house in more than 30 years) but he's never sprayed translucent paint on plastic.   Plus I'd need to bring it back/forth, not damage it, etc.  Yes, I could apply tranlucent white vinyl to the back but with the better translucnt white vinyl at close to $2/sf and adding in the labor to apply it, i might as wall just buy white plastic.   A buddy was going to buy some of the 6x8 sheets but said the same thing about the vinyl cost, time involved, etc.  I was hoping someone needs clear backs for channel letters, vandal covers, etc.   

 

One of the guys had suggested rolling the sheets with white paint for that bank de-branding but it just seemed too "ghetto" to me.