Installer Needed, Myrtle Beach,SC
-
Similar Content
-
By toddh@formetco.com
Sign Installers, LED Video Screen, Service & Installation Technicians (Duluth, GA) Apply at Jobs@formetco.com
Formetco is a 50-year-old Duluth, Georgia based company that manufactures products sold in four divisions: Billboard Hardware, Digital LED Billboards, LED Video Scoreboards and LED Video Screens. The LED Screen business is very dynamic and fast growing. For additional information about Formetco see: http://www.formetco.com/
This is a full-time position. We are searching for a candidate that is seeking a challenging opportunity, motivated to take charge, learn, grow and desires to take on additional responsibilities. Formetco offers a comprehensive benefits package including 401K with match, health, dental, vision, long-term disability and life insurance, and paid time off in the year of hire. Formetco is a Drug-Free Work Place, and a pre-employment drug test is required.
Sign Installer, LED Video Screen, Service & Installation Technicians – We are searching for candidates to service and install large LED Screens used at high profile locations across North America. We have multiple positions open, requiring a wide range of skills ranging from steel working, crane operation, data communications, high and low voltage wiring, computer operation and networking, along with a high level of customer interpersonal communications skills. This position requires technical knowledge and good troubleshooting skills. We operate in a time sensitive environment, supporting & installing large LED Videos screens.
Experienced working with LED Electronic Signs, Scoreboards, LED Video Displays and/or experience working in the Billboard Industry is desired. Must be able to climb billboard structures, be comfortable working at heights of 100’ for extended time frames. Work can occur in a variety of weather conditions. Must have good driving record. CDL is a plus. Ability to manage and assist on-site contractors with the installation of large LED screens, from lifting and mounting, primary power installation, data communications, internet connections, sign commissioning and customer sign off. Can answer questions, manage projects, handle on site issues, communicate professionally with subcontractors, customers and manager. Must be organized, responsible person with the ability to analyze problems and communicate with manager and customers. Computer and Computer Network Knowledge Desirable. Understanding of electrical requirements for wiring general signage. Experienced with high/low voltage power distribution and data communications/networking. Good general mechanical skills and analyzing issues. Education or experience in Welding, Electrical and or Computers/Computer networking a plus. 7 Days a week operation. 50% Travel required with overnight travel and limited international travel. Have a valid passport or can obtain one. We realize that candidates will not have all the above skills. If you feel like this is something you would be interested in and have experience working at heights, climbing, overnight travel is acceptable, we encourage you to apply.
All candidates must have full authorization to work in the US without requiring current or future sponsorship.
Please list the job position you are applying for in your response. We have multiple job OPENINGS, so we need to know what position you are seeking.
EOE
Job Type: Full-time
Below are examples of typical projects
-
By BKBri
Coming to work for our company every day is like an adventure, plus it’s a GREAT PLACE TO WORK! We have over 25 years of experience and currently serve Los Angeles County.
If you think you have what it takes to work on big and or small signs and you are looking to grow with the company and expand your horizons, then WE'RE LOOKING FOR YOU!
Type of Signs:
Channel letters, pole signs, wall signs, LED message signs, Neon etc.
Skills:
Include electrical, welding, cranes operation, etc... Or if you have some experience, learn fast and want to get into this type of work, we would like to talk to you.
Job duties:
Operating big trucks/cranes
Installing/ service
Replacing LED’s
LED Signs
Interior/exterior signs and much more
Manage installation, crew and equipment.
Compensation:
Very Competitive
Schedule:
Normal schedule is Monday through Thursday 6am - 4pm (Schedule is subject to change based on client and/or location requirements.)
Note: IF YOU HAVE NO EXPERIENCE, PLEASE DO NOT APPLY!!
Contact:
If you are interested, please send your resume to: info@bksigns.com
Attn: Pilar Kanner
B.K. Signs, Inc.
1028 Kirkwall Rd
Azusa, CA 91702
Tel: 626-334-5600
-
By Jim Sutterfield
Sign Installer/Service Tech Position Available
Signs Plus Inc. has been in business in Bellingham Washington since 1992. We consult, design, engineer, manufacture, install, and service all types of signage throughout the Pacific Northwest. At Signs Plus Inc. our employees make the difference. Our goal is to hire the best! If you are hard-working, a self-starter, looking for a challenging and rewarding career with a growing company, with a great future, and meet the following criteria, than we have a position for you!
Requirements:
• Applicant must possess a Journeyman Sign Electrician License from the State of Washington.
• Must take pride in work, have a good eye for detail, and possess a positive, get it done attitude.
• Have a strong work ethic and able to work quickly, efficiently, and accurately in a deadline environment.
• Physically fit, able to lift 75 lbs. and be OK with working at heights and in confined spaces.
• Able to read and understand detailed shop drawings, site plans, and sign location drawings.
• Must have experience operating Crane/Ladder Trucks.
• Must have a clean driving record and a CDL-B license.
We offer an excellent Benefits Package that includes the follow:
• Competitive wage
• 75% paid health insurance for employees after 60 days of employment
• 401K Plan
• Paid holidays and vacation
• Consistent 40-50 hour work weeks all year
A pre-employment background check and drug screen are required.
Contact:
Send your resume to: jims@signsplusnw.com
Attn: Jim Sutterfield
Signs Plus Inc
766 Marine Drive
Bellingham, WA 98225
Tel: 360-671-7165
-
By AsalyaFSI
Wages based on experience.
Freeman Signs, Inc. is looking for a full time service electrician to aid our electric department in the hookups, disconnect / reconnect of all types of signage, as well as other industrial, commercial, and residential projects. Position will also require meeting inspectors on job sites to pass inspections.
Best benefits in the industry!
Benefits include:
-Bereavement leave
-Family leave
-8 paid holidays
-Jury duty leave
-Medical insurance
-Dental insurance
-Long term / short term disability
-Life insurance
-Paid vacation
-Uniforms
-Tools
-Supplemental insurance
Please feel free to stop by our office to fill out an application!
We are located at:
3883 N. Monaco Pkwy.
Denver, CO 80207
Resumes can also be emailed to: acalvert@freemansigns.net
You may also apply via:
Facebook: https://www.facebook.com/pg/freemansignsinc/jobs/247436769427019/?source=post_homepage_stream
Indeed: https://employers.indeed.com/j#jobs/view?id=e095f47d808c
-
By BKBri
THE ELECTRICAL SIGN INDUSTRY WANTS YOU : SIGN INSTALLER (Azusa)
Coming to work every day is like an adventure plus its a GREAT PLACE TO WORK!
If you think you have what is takes to work on big and or small signs and looking to grow with the company, expand your horizons.
Type of Signs:
Channel letters, pole signs, wall signs, LED message signs, Neon etc. Then WE'RE LOOKING FOR YOU!
Skills:
Include electrical, welding, cranes operation, etc... Or if you learn fast and want to get into this type of work, we would like to talk to you.
Job duties:
Include operating big trucks/cranes
Installing/ service
Replacing LED’s
LED Signs
interior/exterior signs and much more
Manage installation crew and equipment.
Compensation:
Very Competitive
Schedule:
Normal schedule is Monday thru Thursday 6am-4pm (schedule is subject to change based on client and/or location requirements.)
If you are interested, please, send your resume to info@bksigns.com
-
-
Topics
-
-
Posts
-
Custom electric sign company on business for over 25 years seeking a shop foreman to join our team who knows how to build custom electrical signs. experience with LED, neon , steel aluminum, capable of welding and sheet metal fabrication Experience is a must. please apply by email to: info@bksigns.com
-
Like new Roland VersaCamm VS640 printer for sale - prints white & metallic inks - it needs a print head, but other than that, it is in immaculate condition. You can't even tell we have printed on it I have kept it so clean. I think it is about 7 or 8 years old. We are getting a new printer, so I have to get this one out of the way before we can set the new printer up. Will come with all of the RIP Software (Roland VersaWorks) - Excuse the dirty floor! Had a large project going on in here so I haven't had time to clean! LOL Make me an offer. -
Most Light Source Suppliers and Manufacturers won't show you examples let alone "numbers" of light readings on Sign Cabinet or Sign Projects from light source components they push like these I'm posting here, but....This is The Sign Syndicate! "Seeing is believing" as they say. So, one of the components I've been big on because of feedback and demand is a strong enough LED module that doesn't cost an arm and a leg, isn't proprietary where you need to buy their special clips, brackets, etc, and actually put out enough light without exaggerated "Usable Light" under too far spread spacing that's supposed to save you money that won't compete with other existing signs in the area of your project. Biggest complaint from sign shops about cabinet LEDs....."I don't want to use a whole bunch of power supplies!" You want your clients sign to stand out, NOT be lost or drown out by other neighboring signs also competing for attention and visibility. Most importantly, the BrightON Sunfire LED keeps it simple by allowing custom sign shops not having to pay enormous amounts of money. I've discussed our upcoming new High-End Sign Syndicate BrightON Sunfire LED for Cabinets, Slim Cabinets, and Large Channel Letters before. But I've never had an opportunity to back it up with facts by illustration until now. Let's start with our industry long time standard light source components first. That is good ol HO T12 Fluorescent Lamps. Unlike our industry suppliers and manufacturers I'm not going to bash the use of HO Lamps, they work good, and they do last a long time despite their marketing claims of failure just to sell another light source. There are some very well High-End made HO Lamps for our industry. Back to the project. Here we have your typical 4' x 4' x 12" double sided cabinet that we would either see on a pole or mounted on the ground. 3/16" 7328 Plexiglas MC acrylic face. Using industry standard spacing of lamps at 12" spacing. HO Lamps 6" in from the sides and 12" from lamp to lamp powered by a energy efficient electronic ballast pulling about 126 Watts With four HO 4' lamps with 12" spacing we have a average Foot Candle average right on the sign face of 156.5 FC This is, and has been our industry average for sign surface lighting for DECADES. Here is our High-End Sign Syndicate BrightON Sunfire (pronounced just like the city) A 3 watt LED module with a 170˙ High Uniformity Optics with over 420 lm Most importantly it's 24V system, and Constant Current.... NOT Constant Voltage. This system has reduced amperage, heat, and resistance running across it compared to a 12V and it has more voltage head room for long runs. This calculates to longer life. On a 24V system this means loading more modules on a 96W power supply than a limited 60w power supply of a 12V system. Less moving parts on a project the better. Below and as illustrated we spaced our modules the same as HO Fluorescent Lamps. 6" in, 12" from row to row and one Sunfire Module per foot, spaced 12" apart from one another One thing I wanted on our Sunfire modules were longer wires between each module. You have enough wire (15") to jump from row to row without having to splice...less labor involved and it gives you more room to do what other tasks you may need to do with longer wiring. Using modules like our BrightON Sunfire makes your projects at so much of a lesser cost. Instead of buying special proprietary clips, tracks and mounting brackets just purchase inexpensive alum 1/16" or 1/8" angles and channel for mounting. These typically can be bought in 8', 16', and 24' lengths. The results.....196.5 Foot Candle average on the sign face surface, a 26% brighter face What makes the BrightON Sunfire even better? Adding a True Power France Lighting Solution 24V LED Power Supply. True Power means having the ability to load 100% of a load on a power supply. As you know most power supplies are asked to load to 80%-85%. Not so with France, 100% if need be. Most competing cabinet 12V/24V LED modules will run you anywhere from $7.00 to $15.00 per module. The BrightON Sunfire will only run you $3.75 per module, giving you NOT "Usable Light" but "Real Competitive Light" as illustrated here.....26% brighter, over above our industry standard lighting of T12 HO Fluorescent Lamps!! -
Our 24V France "True Power" Lighting Solution products that will power our Sign Syndicate Brighton LEDs have finally arrived and are now listed up in our Online Shopping Cart. You'll be able to power up 118 .8watt BrightON II LED Modules on a single 96W France LED Power Supply for all your channel letter and sign cabinet projects!!! That means cost savings in using less LED Power Supplies in using a 24V system over a 12V system. A 24V System also reduces the Amperage, Heat, & Resistance running across your LED Modules over a 12V system Two HUGE pluses for your projects, High-End, High Efficiency Constant Current 24V BrightON LEDs powered by True Power France Lighting Solutions Engines.
-
By ledbillboard · Posted
Large outdoor LED display is a high-tech engineering product integrating multi-disciplinary technologies such as electronics, power, computer, communication, information, image processing, optics, materials and structure. The relevant engineering and technical problems in any of these subject areas will affect the final operation of the entire display. A perfect LED display must be an organic combination of multidisciplinary technologies. Led display dot matrix module driver is generally completed by a constant current driver chip. The chip includes a serial shift register, serial-to-parallel conversion and constant current driving and other functional circuit components as shown in Figure 1. The constant current chip is a conversion device that converts the luminance signal of the controller into an appropriate driving current for driving the LED to emit light. The quality factor of the constant current of the constant current device will affect the effective brightness of the Exhibition LED Display Shenzhen. Especially when the refresh rate of the display screen and the number of display gray levels are higher, the constant current chip will more significantly affect the brightness of the entire display screen. As shown in Figure 1, the supply voltage V-LED of the display will also be one of the important factors affecting the brightness, especially when the voltage is lower than the normal on-voltage of the LED, the LED illumination effect is affected, thus affecting the whole The brightness of the display. In summary, in order to solve the brightness problem in the display application, we can take practical measures including: using high-brightness chips, high light-receiving rate to select Indoor rental LED Screen, and designing pre-sufficient while ensuring white balance brightness requirements. Appropriate pixel point combination design to ensure reasonable pixel viewing angle, increase the visual contrast of the display through reasonable arrangement and structure design of the lamp; select high-quality constant current driving chip for reasonable driving current And voltage design to ensure efficient driving of LEDs. Of course, ensuring efficient LED driving requires strong R&D and technical strength. The LED video wall display china industry has grown rapidly in recent years, and has also grown up with a number of excellent display applications and display light source packaging companies, such as display light source packaging. Enterprise--Bai Shi, after years of development and growth, now has its own display R&D lab, dedicated to the research of LED display technology, and a large number of LED display application technologies in the United Nations key research institutes. research work.
-
-
Best Sellers
-
-
Recent Product Reviews
-
(2)We've used these on a number of projects now and have been super happy with the results. The standarBy bowtievega, -
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
.thumb.jpg.594296ea97ec44780eaffd6ed6ee4447.jpg)
