Jump to content

ELECTRIC SIGN SUPPLIES

If You're Looking For Premium Electric Sign Industry Components Like Trim Cap, LED's, USHIO LED Lamps, Neon Supplies, or LED Power Supplies, Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!

Buy Now

NATIONAL SIGN & SERVICE COMPANY REVIEW LIST

For Sign Company's Who Work As Subcontractors

Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

You Must Be A Registered Member & A Subcontractor
Click Here

MEMBER LOCATION MAP

Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call? Locate a Supplier or Advertiser Regarding Thier Goods & Services?

Become a Member & Upgrade Your Free Membership So Others Can Locate You
Click Here
Erik Sine

Sign Installer Map

Recommended Posts

When you upgrade your free membership to a Board Patron (The Order), or by becoming a regular customer of our online Sign Supplies, you will have the ability to place your company on our Sign Installer Map.  

This is a mapping system that helps other Sign Companies find you for subcontract work (Service & Install), or by location as a Vendor.

 

The Installer map is located at the upper horizontal menu bar, or click this link located here.

http://www.thesignsyndicate.com/forums/index.php?/membermap/

 

Just click on the "My Location" Button, or it can show as "Update My Location" if you want to change it.

 

Member-Map.jpg

 

We lost quite a few markers when we upgraded the site recently, and I apologize for you having to redo. 

 

This mapping system is still in the process of upgrading so in the upcoming days you will see small changes such as the mebers company name also appear when you hover/click on a marker.

 

Membership Upgrade Link http://www.thesignsyndicate.com/forums/index.php?/store/category/1-membership-upgrade/

 

 


You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Share this post


Link to post
Share on other sites

How do we become able to post our location on that map?

Share this post


Link to post
Share on other sites

which map app is best

Share this post


Link to post
Share on other sites

Just improved the Installer Map Function

 

Now when you select a member on the map you will see some quick contact info rather than having to click again on the members name to go to their profile.

 

So it's very important for users to go to their profile and fill out all necessary fields to make it easier to be contacted.  We'll be adding more quick options too soon.  Any suggestions you may have would be helpful.

 

Current Fields that show up are

COMPANY:

NAME:

LOCATION:

CONTACT NO.

EQUIPMENT:

WEBSITE URL: (Coming Soon)

 

Membermap Preview.jpg

 

 

 


You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Share this post


Link to post
Share on other sites

Board Patron's don't forget to mark yourself on our Installer Map if you take on any subcontracting for Installs or maintenance from other sign companies, it'll be much easier to find you!


You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By magicone
      Electrical Sign Installation and Service personnel needed. Must have Oregon and WA installers license and CDL current. Top pay, vacation, holiday, 401K with employer match, medical and dental. Signing bonus .  Call for an interview 503 777 4555 or email resume to wendy@ramsaysigns.com. Only licensed candidates will be considered.
    • By susie@lnssigns.com
      Sign Manufacturing Company located in Dallas, TX is looking for candidates to join our team in the following areas…..







      Master & Journeyman Sign Installers, Fabricators, Assembly, Channel Lettering, and Project Managers







      We are looking for people with experience with all types of signs including neon, electrical & non-electrical sign.







      We offer top pay for these positions and a laid back environment to work in!



      For more information or questions feel free to contact us at:



      972-790-8900


    • By Erik Sine
      Hi Folks,
      Just an update. The Directory has been up before but it sort of died due to my actions of not keeping it up. However the software for it has been improved and a lot more user friendly so I'll be toying with it over the next few weeks to month.
      The directory is located in the above horizontal menu right next to the "Sign Installer & Service Map". Soon the Directory will be replacing that, and most likely the current "Company Review Lists" because the new directory you will be able to view all categories or filter such categories as "Sign & Service Companies", National Sign & Service Companies, and Sign Supply/ Distributors.
      The Directory is complete with maps and company comments & opinions
      Going forward this will be our new review system of companies that you have done business with, and or are curious about what others experiences were when they did do business with them.
      Anyway, as we go forward Upgraded Paid membership National Sign Companies or "National Patron's" will be able to add subcontractors and review them, and view their own profile.
      Upgraded Paid Membership Sign Companies or Subs will be able to list themselves where others can view them, rate them, and be made visible on the Installer & Service Map.
      Nothing has really changed when it comes to the current accessibility or group permissions. Subs, paid memberships or not, will still be able to rate National Sign & Service providers.
      it still might be acting quarky, but if you have issues accessing it let me know, and if you have any suggestions let me know. Suggestions on fields that should be added etc.
      Oh, and the name will change over to just "Company Directory" because their will be a couple of different categories
      http://www.thesignsyndicate.com/forums/index.php?/firmy/
    • By Sign Ninja
      Is it me, or is it really hard to come across qualified help these days? Anyone else have this problem, or is it just dependent on local?


  • Topics

  • Posts

    • Custom electric sign company on business for over 25  years seeking a shop foreman to join our team who knows how to build custom electrical signs. experience with LED, neon , steel aluminum, capable of welding and sheet metal fabrication Experience is a must. please apply by email  to: info@bksigns.com
    • Like new Roland VersaCamm VS640 printer for sale - prints white & metallic inks - it needs a print head, but other than that, it is in immaculate condition.  You can't even tell we have printed on it I have kept it so clean.  I think it is about 7 or 8 years old.  We are getting a new printer, so I have to get this one out of the way before we can set the new printer up.  Will come with all of the RIP Software (Roland VersaWorks)  - Excuse the dirty floor!  Had a large project going on in here so I haven't had time to clean!  LOL             Make me an offer.
    • Most Light Source Suppliers and Manufacturers won't show you examples let alone "numbers" of light readings on Sign Cabinet or Sign Projects from light source components they push like these I'm posting here, but....This is The Sign Syndicate!   "Seeing is believing" as they say.   So, one of the components I've been big on because of feedback and demand is a strong enough LED module that doesn't cost an arm and a leg, isn't proprietary where you need to buy their special clips, brackets, etc, and actually put out enough light without exaggerated "Usable Light" under too far spread spacing that's supposed to save you money that won't compete with other existing signs in the area of your project.    Biggest complaint from sign shops about cabinet LEDs....."I don't want to use a whole bunch of power supplies!"   You want your clients sign to stand out, NOT be lost or drown out by other neighboring signs also competing for attention and visibility.   Most importantly, the BrightON Sunfire LED keeps it simple by allowing custom sign shops not having to pay enormous amounts of money.   I've discussed our upcoming new High-End Sign Syndicate BrightON Sunfire LED for Cabinets, Slim Cabinets, and Large Channel Letters before.  But I've never had an opportunity to back it up with facts by illustration until now.   Let's start with our industry long time standard light source components first.    That is good ol HO T12 Fluorescent Lamps.    Unlike our industry suppliers and manufacturers I'm not going to bash the use of HO Lamps, they work good, and they do last a long time despite their marketing claims of failure just to sell another light source.  There are some very well High-End made HO Lamps for our industry.   Back to the project.   Here we have your typical 4' x 4' x 12" double sided cabinet that we would either see on a pole or mounted on the ground.    3/16" 7328 Plexiglas MC acrylic face.  Using industry standard spacing of lamps at 12" spacing.        HO Lamps 6" in from the sides and 12" from lamp to lamp powered by a energy efficient electronic ballast pulling about 126 Watts         With four HO 4' lamps with 12" spacing we have a average Foot Candle average right on the sign face of 156.5 FC    This is, and has been our industry average for sign surface lighting for DECADES.         Here is our High-End Sign Syndicate BrightON Sunfire  (pronounced just like the city)     A 3 watt LED module with a 170˙ High Uniformity Optics with over 420 lm   Most importantly it's 24V system, and Constant Current.... NOT Constant Voltage.    This system has reduced amperage, heat, and resistance running across it compared to a 12V and it has more voltage head room for long runs.  This calculates to longer life.  On a 24V system this means loading more modules on a 96W power supply than a limited 60w power supply of a 12V system.  Less moving parts on a project the better.     Below and as illustrated we spaced our modules the same as HO Fluorescent Lamps.  6" in, 12" from row to row and one Sunfire Module per foot, spaced 12" apart from one another   One thing I wanted on our Sunfire modules were longer wires between each module.  You have enough wire (15") to jump from row to row without having to splice...less labor involved and it gives you more room to do what other tasks you may need to do with longer wiring.   Using modules like our BrightON Sunfire makes your projects at so much of a lesser cost.  Instead of buying special proprietary clips, tracks and mounting brackets just purchase inexpensive alum 1/16" or 1/8" angles and channel for mounting.  These typically can be bought in 8', 16', and 24' lengths.        The results.....196.5 Foot Candle average on the sign face surface, a 26% brighter face       What makes the BrightON Sunfire even better?   Adding a True Power France Lighting Solution 24V LED Power Supply.  True Power means having the ability to load 100% of a load on a power supply.  As you know most power supplies are asked to load to 80%-85%.  Not so with France, 100% if need be.       Most competing cabinet 12V/24V LED modules will run you anywhere from $7.00 to $15.00 per module.    The BrightON Sunfire will only run you $3.75 per module, giving you NOT "Usable Light" but "Real Competitive Light" as illustrated here.....26% brighter, over above our industry standard lighting of T12 HO Fluorescent Lamps!!      
    • Our 24V France "True Power" Lighting Solution products that will power our Sign Syndicate Brighton LEDs have finally arrived and are now listed up in our Online Shopping Cart.   You'll be able to power up 118 .8watt BrightON II LED Modules on a single 96W France LED Power Supply for all your channel letter and sign cabinet  projects!!!    That means cost savings in using less LED Power Supplies in using a 24V system over a 12V system.    A 24V System also reduces the Amperage, Heat, & Resistance running across your LED Modules over a 12V system   Two HUGE pluses for your projects, High-End, High Efficiency Constant Current 24V BrightON LEDs powered by True Power France Lighting Solutions Engines.
    • Large outdoor LED display is a high-tech engineering product integrating multi-disciplinary technologies such as electronics, power, computer, communication, information, image processing, optics, materials and structure. The relevant engineering and technical problems in any of these subject areas will affect the final operation of the entire display. A perfect LED display must be an organic combination of multidisciplinary technologies. Led display dot matrix module driver is generally completed by a constant current driver chip. The chip includes a serial shift register, serial-to-parallel conversion and constant current driving and other functional circuit components as shown in Figure 1. The constant current chip is a conversion device that converts the luminance signal of the controller into an appropriate driving current for driving the LED to emit light. The quality factor of the constant current of the constant current device will affect the effective brightness of the Exhibition LED Display Shenzhen. Especially when the refresh rate of the display screen and the number of display gray levels are higher, the constant current chip will more significantly affect the brightness of the entire display screen. As shown in Figure 1, the supply voltage V-LED of the display will also be one of the important factors affecting the brightness, especially when the voltage is lower than the normal on-voltage of the LED, the LED illumination effect is affected, thus affecting the whole The brightness of the display. In summary, in order to solve the brightness problem in the display application, we can take practical measures including: using high-brightness chips, high light-receiving rate to select Indoor rental LED Screen, and designing pre-sufficient while ensuring white balance brightness requirements. Appropriate pixel point combination design to ensure reasonable pixel viewing angle, increase the visual contrast of the display through reasonable arrangement and structure design of the lamp; select high-quality constant current driving chip for reasonable driving current And voltage design to ensure efficient driving of LEDs.   Of course, ensuring efficient LED driving requires strong R&D and technical strength. The LED video wall display china industry has grown rapidly in recent years, and has also grown up with a number of excellent display applications and display light source packaging companies, such as display light source packaging. Enterprise--Bai Shi, after years of development and growth, now has its own display R&D lab, dedicated to the research of LED display technology, and a large number of LED display application technologies in the United Nations key research institutes. research work.
  • Best Sellers

  • Recent Product Reviews

×
×
  • Create New...