Jump to content

Sticky Notes

Want to see more content on this site?

Register and Log In....It's FREE!!!  

 

Having Trouble?  Email us Link

 

Click the X to close this box

Kgirl Kgirl

ELECTRIC SIGN SUPPLIES

If You're Looking For Premium Electric Sign Industry Components Like Trim Cap, LED's, USHIO LED Lamps, Neon Supplies, or LED Power Supplies, Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!

Buy Now

NATIONAL SIGN & SERVICE COMPANY REVIEW LIST

For Sign Company's Who Work As Subcontractors

Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

You Must Be A Registered Member & A Subcontractor
Click Here

MEMBER LOCATION MAP

Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call? Locate a Supplier or Advertiser Regarding Thier Goods & Services?

Become a Member & Upgrade Your Free Membership So Others Can Locate You
Click Here

Recommended Posts

Have some old stock glass housings That have been sitting too long and need a new home. Total qty may go up as I am still finding stuff Bulk buy can be had cheaper than listed prices All prices plus shipping in lower 48 only

 

#100 housings $7 each    Qty 135

#200 Housings $6 each   Qty 85

#200p Housings $6 each  Qty 50 (some are missing lock rings)

Partial box of Clip its  $60

Plastic HC housing caps $125

New PK housings $5 each but have been painted purple on the glass Qty 25

case of 1.75" prewired tube supports $125

20200402_092556_resized.jpg

20200402_092713_resized.jpg

20200402_092723_resized.jpg

20200402_092904_resized.jpg

20200402_095830_resized.jpg

20200402_095841_resized.jpg

20200402_101948_resized.jpg

20200402_102608_resized.jpg

20200402_102612_resized.jpg

20200402_103020_resized.jpg

Share this post


Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Topics

  • Posts

    • They are owned by Media Resources in Canada. They have there own accounts and will also take work from National Sign companies like Philly, MC / Icon, AGI and other and than try to job them out.  If you can come to an agreement on price they are good pay. 
    • $ 1,120. a week to stay home.     PLUS a $ 600. Food Voucher a month to stay home on the couch.  TOTAL ........$ 1,270. a week.   And Here in NYC, Our Mayor,  Mayor DumBlasio purchased 34,000 Air Conditioners to GIVE away FREE to people who are ...? And the City will pay their Electric Bill  WHY WORK ?  
    • We still have some money from our PPP grant, thank goodness, so today we wrote another salary check, 35 hours to our three full time employees, 15 hours to a couple of part time "as needed" employees. We actually got a couple of emails from some regular customers, like Pepperdine College. We also snagged a new customer, even though it's just tiny vinyl jobs. It is our landlord. I told them that if they would buy their signs from us, we'd just take out the cost of the materials for the time being, and put everything else back into paying them our lease payment. Hopefully a couple of months of that, we'll have made a dent in what we now owe them, and we'll have a good new client for the future.    For anyone who sells ADA signs and gets them wholesale, we're working on something new that might interest you, especially if you do color printing and vinyl but don't have any way to do raised characters and braille. We've come out with a new line called "ADA/SterilEaze™." It takes advantage of a change in the ADA Standards from 2010 that almost no one knows about. You can have a completely separate raised character/braille message and corresponding visual message that is much larger, bolder, serif font if you want and placed much higher on the wall. It's just that the information has to be the same identification of the door or floor level. So, in other words, you could have a big hospital room number, say A135, mounted up above where most people could touch it and then down at the legal location have a very small virtually invisible raised sign, also A135, with braille below it. The visual sign's major requirements is that it must have high contrast and be non-glare and not use decorative fonts. The tactile sign doesn't need any color at all and it's even preferable to use tiny 5/8 inch high letters because that makes it easier and faster to read by touch. You could paint it on the back to match the wall color, for instance. Or, you could order a larger tactile plaque and put the company logo on the second surface or a message that says "Did you wash your hands?" or for a religious institution, a scriptural verse. A school might have the school mascot. Obviously, the blind person who only reads by touch is unaware of all this, and it does not interfere with reading the information needed.    The good thing is that the tactile sign will be extremely easy and fast to sterilize and it absolutely will not disintegrate or degrade in any way. For anyone who wants to sell ADA signs but can't do thermoforming it gives them an opportunity to provide the visual sign, and to provide any subsurface color or even decoration they might want to add to customize the background of the tactile sign. I should add why it's so important that the sign be thermoformed. Although photopolymer is advertised as a one piece sign, it's not. It's a water soluble gel layer on either plastic or metal. Too much moisture and the braille dots and edges of the characters disintegrate. Metal won't disintegrate, but it needs to be painted, so that's another porous virus catcher, and too much cleaning will eventually start to wear the paint away. You can apply letters and rasters to acrylic, but those signs may also start losing the adhesive adhered letters or braille dots may fall out if they need to be cleaned a lot. Thermoforming is a true one-piece or monolithic piece of molded acrylic with no coating of any kind on the surface required. Because it is molded, you can create perfectly rounded braille dots and also completely rounded character profiles, so its not only very easy to read, but easy to clean.    So, we invite all our electrical sign friends who have clients who would benefit, to inquire about our new ADA compliant SterilEaze™ system.  Steril-Eaze_Signs.pdf
    • I'm hearing a lot of conversations about Sign Company Employers having issues getting employees "back" to work.   Some find it easier to stay "unemployed" and collect a check.  Some want to stay partial employed to get the "Covid $600" check.     Some states like mine, the Grand State of California dripping back the Shut Down slooooowly, while a lot of states are almost fully open.   Anyone running into this issue?
    • I would love to see a sign magazine Call the " Sign Syndicate Magazine"  and I bet most of us would agree. A true sign trade magazine not catering to the corporate advertisers. Just the facts mam!  I wonder how much funding it would take to get it off the ground? What you say Eric?  We could all do our part by sending in articles and subscribing to it.  
×
×
  • Create New...