Jump to content

ELECTRIC SIGN SUPPLIES

If You're Looking For Premium Electric Sign Industry Components Like Trim Cap, LED's, USHIO LED Lamps, Neon Supplies, or LED Power Supplies, Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!

Buy Now

NATIONAL SIGN & SERVICE COMPANY REVIEW LIST

For Sign Company's Who Work As Subcontractors

Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

You Must Be A Registered Member & A Subcontractor
Click Here

MEMBER LOCATION MAP

Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call? Locate a Supplier or Advertiser Regarding Thier Goods & Services?

Become a Member & Upgrade Your Free Membership So Others Can Locate You
Click Here

Recommended Posts

 

 

Most LED MFG's will just suggest layouts and tell you how many LEDs per foot without telling you how their LEDs will match up against the Standard Lighting in our industry which is Fluorescent HO Lamps.  If you haven't done any lighting for cabinets or never noticed, most fall short of even meeting the luminance that Fluorescent lamps give out on a sign face.

 

The light that falls short is known as "Usable Light", or light that just gets you there.  It's not Competitive lighting that you would need if your sign I located in a shopping center in competition with other signs looking to be noticed.

 

So here we have our new BrightON II....

 

BrightON IV Logo 2.png

 

 

The conventional Fluorescent HO (800ma High Output) Lamp light output is the standard in the Electric Sign Industry.  When loaded, configured, and installed correct with no cross talk, these lamps and ballasts are a VERY good light source that last for years.

 

Our High Efficient High-End BrightON IV HO LED modules match the light output of Fluorescent HO lamps of our longtime Electric Sign Standards in lighting applications.  More Light for Lesser Power

 

The Brighton IV LED is Constant Current, uses a High Efficient chip for illumination, mounted on a Aluminum PCB for better thermal cooling...not that we need Aluminum for a chip that is already under driven and produces less heat & resistance due to operating on a 24V System.

 

With the BrightON IV you'll save money in project costs over buying specialized proprietary channels/bars (Another reason for a sale) by simply purchasing some right angle aluminum channels for the top and bottom of a sign cabinet, and placing aluminum tubing in between to mount your High-End low cost BrightON IV LEDs on.

 

 

 

 

Double Face Sign Test Cabinet 

4’ x 4’ x 12” D

Module to face 5”

Sign Face 3/16” Plexiglas MC White #7328

 

Bright%20IV%20vs%20Exposed%20LRG.jpeg

 

 

Fluorescent HO Lamp System

Lamps in single and double faces cabinet fabrication typically are spaced 12” OC (On Center)

Sign Face Luminance: 156.5 Foot Candles

Power Consumption: 126 Watts

 

 

BrightON IV

Double Face Sign Cabinet Spacing.  8” OC Module to Module, 12” OC Between Rows for Module to Sign Face in depths of 5” or 3”

5” Module to Sign Face Luminance: 156.5 Foot Candles

3.5” Module to Sign Face Luminance: 164 Foot Candles

Power Consumption: 76.8 Watts

 

126 Watts - 76.8 Watts = 39% Savings in Energy Consumption

 

Single Face Spacing Suggestions

5” Depth, 9” - 9.5” spacing between rows, 7.5” - 8.5” spacing between modules

3” Depth, 8” - 9” spacing between rows, 8” - 9” spacing between modules

 

 

BrightON IV Usable Light Spacing

If you want and need "Usable Light", here it is...some cases call for it.  This lighting would be slightly brighter than Hanley's NRG4.

 

Double Face Sign Cabinet Spacing.  9.5” OC Module to Module, 12” OC Between Rows for Module to Sign Face in depths of 5” or 3”

Sign Face Luminance: 134.5 Foot Candles

Power Consumption: 64 Watts

 

126 Watts - 76.8 Watts = 49% Savings in Energy Consumption

 

Bright%20IV%20vs%20HO%20Flour.jpeg

 

 

 

Why use the BrightON IV LED?

 

• For starters it's Constant Current unlike using Principal LED's Constant Voltage Qwik Mods or others.  Constant Current means each module is current regulated with translates to longer life.

 

• It's a 24 Volt system, which means our system has half the current running through the wiring and board which translates to half the heat & resistance of a 12 volt system.  In other words....Longer Life.

 

• With a 24V system you're able to use more LED modules on a single 96W channel over a 60W channel.

 

 

 

BrightON IV Aspects

 

 

  • 24V High Performance, High Brightness LED Module
  • Half the Amperage, Less Heat & Resistance than a 12V LED Module
  • Aluminum PCB
  • 40 Modules Per Bag 32.5’ (Full Stretch)
  • 1.23 Modules Per Foot
  • Constant Current Regulated, NOT Constant Voltage
  • 175˙ High Efficiency Uniformity Optics
  • 5 year, 50K Lifetime
  • U.L. File E520387

 

Bright IV Measures.jpg

 

IMG_6525.jpeg

 

 

For Inquiries or Orders you can contact us at (858) 880-1400 | orders@thesignsyndicate.com | order through our online Shopping Cart below

 

 

 

 

You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
  • Create New...