Search the Community
Showing results for tags '24v'.
Found 2 results
Maybe I should have titled it "That BrightON Halo Illumination" Thought I would share a project where our new High-End 24 volt, .8watt BrightON II LED Modules were used. As I've discussed before in the past. There is a difference and a gap between "Usable Light" and "Competitive Light". The BrightON II is the most efficient (Light per power) LED Module in it's class, and it is the definition of Competitive Light. As explained here and suggested for spacing, it was chosen to use the 3" module spacer, and obviously you'll see as you scroll down the spacing could have even been much farther apart. Using the 3" spacers or 5" on center module to module spacing of the .8 watt will give you that extra punch for Halo and Day / Night faces, and you're looking at only $2 a foot buying a single bag of modules. Important note is what you're getting for that $2 a foot. Very easily module to module spacing could have been 7" OC, and a $1.45 a foot. The Grand Result? No over exposure here to make the lighting more extreme than "IRL"...in real life. because I have another picture to share here of a neighboring sign that is made up of your standard front illuminated channel letters. This is the very visual explanation of "Competitive Light". The BrightON II Modules will give sign shops more versatility with their lighting projects, eliminating a 3 diode module & eliminating stocking more various modules with just simple spacing making the BrightON II a more universal product in your shop. The reason? Because the BrightON II meets or exceeds the Performance of most 3 diode LED Modules on the market on Maximum Efficiency of 24V. Also, the long module to module wire leads. Could you just imagine for a second the BrightON II LED modules in the neighboring Coffee Sign at the maximum stretched module to module spacing of 7.625" or 1.57 ($1.33 a foot) modules per foot? I can! Something is being left out here and I have to discuss what completes this High-End system? That would be adding a France Lighting Solution LED Power supply of course In this case the 24V France Atlas with built in LED indicator light for proper function, bringing more Quality & Dependability to the project. The most important aspect of this job was the feedback from the client. They were VERY impressed with their sign when they drove by at night to see what their identity looked like. Their face will be your face. These are the types of results you will get with the BrightON II LED Modules. Finished jobs will sell themselves. Happy, impressed clients will sell, and market for you...provided you not only sold them a good product but good service as well. Come night, the mere visual can attract potential customers and a resume address can assure and close sales prospects, end results will be referral makers! FRANCE LED POWER SUPPLIES http://www.thesignsyndicate.com/forums/index.php?/store/category/22-led-power-supplies/
Most Light Source Suppliers and Manufacturers won't show you examples let alone "numbers" of light readings on Sign Cabinet or Sign Projects from light source components they push like these I'm posting here, but....This is The Sign Syndicate! "Seeing is believing" as they say. So, one of the components I've been big on because of feedback and demand is a strong enough LED module that doesn't cost an arm and a leg, isn't proprietary where you need to buy their special clips, brackets, etc, and actually put out enough light without exaggerated "Usable Light" under too far spread spacing that's supposed to save you money that won't compete with other existing signs in the area of your project. Biggest complaint from sign shops about cabinet LEDs....."I don't want to use a whole bunch of power supplies!" You want your clients sign to stand out, NOT be lost or drown out by other neighboring signs also competing for attention and visibility. Most importantly, the BrightON Sunfire LED keeps it simple by allowing custom sign shops not having to pay enormous amounts of money. I've discussed our upcoming new High-End Sign Syndicate BrightON Sunfire LED for Cabinets, Slim Cabinets, and Large Channel Letters before. But I've never had an opportunity to back it up with facts by illustration until now. Let's start with our long time industry standard light source components first. HO Fluorescent Lamps That is good ol HO T12 Fluorescent Lamps. Unlike our industry suppliers and manufacturers I'm not going to bash the use of HO Lamps, they work good, and they do last a long time despite their marketing claims of failure just to sell another light source. There are some very well High-End made HO Lamps for our industry. Back to the project. Here we have your typical 4' x 4' x 12" double sided cabinet that we would either see on a pole or mounted on the ground. 3/16" 7328 Plexiglas MC acrylic face. Using industry standard spacing of lamps at 12" spacing. HO Lamps 6" in from the sides and 12" from lamp to lamp powered by a energy efficient electronic ballast pulling about 126 Watts With four HO 4' lamps with 12" spacing, using a Light Meter to measure the sign face surface light we have a Foot Candle average of 156.5 FC (FC High 163, FC Low 150) This is, and has been our industry average for sign surface lighting for DECADES. Here is our High-End Sign Syndicate BrightON Sunfire (pronounced just like the city) A 3 watt LED module with a 170˙ High Uniformity Optics with over 420 lm Most importantly it's 24V system, and Constant Current.... NOT Constant Voltage. This system has reduced amperage, heat, and resistance running across it compared to a 12V and it has more voltage head room for long runs. This calculates to longer life. On a 24V system this means loading more modules on a 96W power supply than a limited 60w power supply of a 12V system. Less moving parts on a project the better. Below and as illustrated we spaced our modules the same as HO Fluorescent Lamps. 6" in, 12" from row to row and one Sunfire Module per foot, spaced 12" apart from one another One thing I wanted on our Sunfire modules were longer wires between each module. You have enough wire (15") to jump from row to row without having to splice...less labor involved and it gives you more room to do what other tasks you may need to do with longer wiring. Using modules like our BrightON Sunfire makes your projects at so much of a lesser cost. Instead of buying special proprietary clips, tracks and mounting brackets just purchase inexpensive alum 1/16" or 1/8" angles and channel for mounting. These typically can be bought in 8', 16', and 24' lengths. The results.....Same Light Meter, measuring the same surface area on the sign face we get a 196.5 Foot Candle average (FC High 205, FC Low 188) That's a 26% brighter sign face!!! What makes the BrightON Sunfire even better? Adding a True Power France Lighting Solution 24V LED Power Supply. True Power means having the ability to load 100% of a load on a power supply. As you know most power supplies are asked to load to 80%-85%. Not so with France, 100% if need be. Most competing cabinet 12V/24V LED modules will run you anywhere from $7.00 to $15.00 per module. The BrightON Sunfire will only run you $3.75 per module, giving you NOT "Usable Light" but "Real Competitive Light" as illustrated here.....26% brighter, over above our industry standard lighting of T12 HO Fluorescent Lamps!!