Jump to content

ELECTRIC SIGN SUPPLIES

If You're Looking For Premium Electric Sign Industry Components Like Trim Cap, LED's, USHIO LED Lamps, Neon Supplies, or LED Power Supplies, Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!

Buy Now

NATIONAL SIGN & SERVICE COMPANY REVIEW LIST

For Sign Company's Who Work As Subcontractors

Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

You Must Be A Registered Member & A Subcontractor
Click Here

MEMBER LOCATION MAP

Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call? Locate a Supplier or Advertiser Regarding Thier Goods & Services?

Become a Member & Upgrade Your Free Membership So Others Can Locate You
Click Here

LIGHTNING DEAL TUESDAY - Channel Bond & Resin Bond Quarts Combo


Recommended Posts

LIGHTNING DEAL TUESDAY


Channel Bond & Resin Bond Quarts Combo



$96.75 + Hazmat ($28.00) + 50% off shipping anywhere in the US (except Hawaii & Alaska) for this 1 Quart of Channel Bond, and 1 Quart of Resin Bond Combination. If you haven't used Resin Bond before it's the equivalent to Weld-On 3 & 4. Limited Quantities Available!!!!



To order call us at (858) 880-1400 or email us at orders@thesignsyndicate.com



post-3-0-48676700-1369144069_thumb.jpg


You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Erik Sine
      SHOPPING CART LINK
      DAILY DELIVERY FOR SAN DIEGO




      3/4" ($47.75) & 1" ($55.75) + Shipping
      Colors are below

      * Black
      * White
      * Gold
      * Silver (Brushed Silver Appearance)
      * Bronze
      * Duranotic Bronze
      * Orange
      * Red ( 3M Poppy Red 3630-143 | Pantone 179 C )
      * Blue ( 3M Intense Blue 3630-127 | Pantone 300 C )
      * Dark Blue (Avery Dark Blue 8500-007)
      * Yellow ( 3M Sunflower 3630-25 | Pantone 124 C )
      * Green ( Oracal Emerald Green 8800-087 | Pantone 348 C )
       
       
      Some notes I'd like to add about this product.

      Some may have used this product in the past and some may have never had a chance. This product disappeared from suppliers right after 9/11 from what I understand there were Customs issues that made it too costly to bring in.

      IF you remember this product from long ago, you will be glad it's back (just like the reaction I've gotten to all who have purchased from me).

      IF you have never used it, your fabricators will love you for using it, it's MUCH MUCH easier to work with and notch, you won't get those splits you sometimes get on corners.
      My other understanding is that this product was mainly distributed on the west coast, so not many on the east coast have ever tried it. My advice is try it, believe me YOU will LOVE it!

      Before 9/11 I used PLASCO and the Silvatrim Trimcaps. I still have signs up 16+ years and this trim cap is still up, it's very durable.
       
       
       
      PLASCO Trim for Polycarbonate Channel Letter Faces
      Plasco is an excellent channel letter trim cap to be used to fabricated polycarbonate / Lexan channel letter faces. We also stock Channel Bond, the 1 part system which makes it easy for bonding Plasco Trim to Polycarbonate. You can also find Channel Bond here
       
      PLASCO VS JEWELITE
      In another thread I was asking why anyone east of Colorado "WHY" they mainly buy 1" Jewlite and not 3/4" Jewelite for 24" Channel Letters and smaller.
       
      The reason seems to be is that when you use 1" Jewelite with a standard 3/16" channel letter face the 1" Jewelite gives you more clearance because the arrow extrusion protrudes more than 1/4" from the face giving you less mechanical fastening room. Make sense but 1" is very tough to notch, bend and get in small letter centers too because of that arrow extrusion.
       
      I was always use to Plasco Trim Cap in my years of the sign industry, NOT Jewelite because on the West Coast Plasco was stocked more than Jewelite before 9/11. So after this "clearance" point was brought up I did some quick measuring because I had a east coast client buy Plasco 1" to match up with his regular use of 1" Jewelite. Then shortly after receiving his order with 3/4" samples he soon after starting ordering 3/4". I asked him why the change in smaller trim. He said the change was because the 3/4" Plasco trim gave him the same fastening clearance that he got buying 1" Jewelite. He went from paying about $70.00 per roll to $44.75 saving $32.15
       
      I've attached some images to show you that you can use 3/4" Plasco Trim Cap that will give you the same clearance as 1" Jewelite IF clearance is important to you.
       
      Plasco vs. Jewelite - Here we display the channel letter baseline along with the clearance you get using 3/4" & 1" Plasco / Jewelite Trim Caps

       
      1" Jewelite clearance

       
      1" Plasco - More mechanical clearance than 1" Jewelite

       
      3/4" Plasco - Just about the same mechanical clearance as using 1" Jewelite

       
      3/4" Jewelite - Less mechanical clearance than 3/4" Plasco

       
      1" Jewelite - Arrow extrusion protrusion more than 1/4" past the channel letter face.

       
      http://www.thesignsyndicate.com/miscstuff/adverts/examples/Plasco Trim Cap.JPG
       
      U.L. Sign Accessories Manual Info
      Plasco is a Elkamet product made in Germany and their U.L. file number is E10010

      ELKAMET KUNSTSTOFFTECHNIK GMBH GEORG-KRAMER STRASSE 3
      PO BOX 1263
      35216 BIEDENKOPF FED REP GERMANY Aluminum reinforced sign face trim, Type Elkamet Profiles.
      E100102
      1. These trim materials are used to secure a rigid thermoplastic sign face to an outdoor or indoor sign.
      2. The ability of the trim to exclude water from contacting live parts needs to be evaluated in the end product.
      3. Minimum No. 8 sheet metal screws need to be provided for securing the trim to the sign body. The maximum spacing
      between screws shall not exceed 18 in. and no fewer than four screws are to be used per face.
      4. These products do not comply with enclosure requirements.
      5. The sign trim face shall be "Continuous solvent or adhesive bonding" to secure the sign face and trim together in one of the
      following combinations:

      Sign Face (Generic Material) = Methyl Methacrylate (Acrylic)
      Solvent = MethyleneChloride
      Sign Trim (Generic Material) = Cellulose Acetate Butyrate




       
      You can contact me by email for orders / inquiries at
      orders@thesignsyndicate.com or (858) 880-1400 or purchase from out online Shopping Cart
    • By Erik Sine
      Channel Bond & Resin Bond - Christmas Special


      We're offering a bundle Channel Bond & Resin Bond Special. If you're in need of an adhesive to bond polycarbonate to polycarbonate, Plasco Trim Cap (For Channel Letter faces) to polycarbonate, or acrylic to polycarbonate then the one part system Channel Bond is for you!

      Channel Bond is a one part system. This means NO additional guns, nozzle tips, cartridges to purchase, in other words....NO waste, NO wasted half spent cartridges. Just pour back in the container when you're done using for another time!!!

      Resin Bond is your equivalent of Weld-On 3 & 4, used for acrylic to acrylic or acrylic to Plasco Trim Cap.

      Makrolon / Sheffield Plastics highly recommends using Channel Bond to fabricate channel letter faces with their polycarbonate!

      COMBO BUNDLE
      We can ship you one gallon of both Channel Bond & Resin Bond for $309.99 + HAZMAT & Shipping,
      or our combo special of one quart of Channel Bond & Resin Bond for $96.75 + HAZMAT & Shipping.

      SINGLE QUANTITIES
      Gallon of Channel Bond $249.99 + HAZMAT + Shipping
      Gallon of Channel Bond $79.99 + HAZMAT + Shipping


      To place an order you can buy direct from our online shopping cart LINK

      For inquires, full product & price list or large orders you can call us at (858) 880-1400 or email us at orders@thesignsyndicate.com

      Channel Bond a one part system that can be used in place of Lords 7550 Two-Part Urethane Adhesive, Lords 7556 Urethane Adhesive Two-Part Urethane Adhesive, Weld-On / SCIGRIP 58, Weld-On / SCIGRIP 55

      CHANNEL BOND VIDEO


    • By Erik Sine
      Just to let everyone know we are now shipping Channel Bond and Resin Bond. You can also order directly from our store (Mainland US ONLY) HERE

      If you haven't ever used Channel Bond you are truly missing out.






      Channel Bond is a one part system that's used to bond polycarbonate to polycarbonate, especially polycarbonate to Plasco Trim Cap. Many people shy away from using polycarbonate as channel letter sign faces because they have had issues or problems bonding trim cap to polycarbonate or have heard there are issues from the rumorville.
      Makrolon / Sheffield Plastics highly recommends using Channel Bond to fabricate channel letter faces with their polycarbonate!




      Well I can tell you most of the issues people have had in the past with either by their own experience, or from heard from rumorville of other shop experiences in short.....Is simply not true. You can bond polycarbonate to trim cap but you have to do it right, and give it time. Most of the time people who have failed to bond the two materials did so because they bonded the materials incorrectly!!! Most of the time they simply applied the adhesive on top where the two materials are meeting, and NOT where the two surface faces actually touch each other. When shops don't do it correctly and have a failure it can lead to a misnomer that it cannot be done.

      The best part about Channel Bond is it's a one part system, I said a 1 part system!!! No need to go out and purchase a special gun that combines a two part system, NO need to buy nozzle tips, NO need to throw away good half spent cartridges because it's already been activated. With Channel Bond you just use Hypo Needle applicator and pour what you don't use back in the container, simple!!! No wasting!!!

      We are stocking Channel Bond in Quarts and Gallons, and here is a small job where we showed some uses of Channel Bond LINK

      Channel Bond a one part system that can be used in place of Lords 7550 Two-Part Urethane Adhesive, Lords 7556 Urethane Adhesive Two-Part Urethane Adhesive, Weld-On / SCIGRIP 58, Weld-On / SCIGRIP 55

      For any order or inquiry, or for a full product and price list you can call us at (858) 880-1400 or email us at orders@thesignsyndicate.com You can also order directly from our store HERE
    • By Erik Sine
      Channel Bond & Resin Bond - Combo Special

      We're offering a bundle Channel Bond & Resin Bond Special. If you're in need of an adhesive to bond polycarbonate to polycarbonate, Plasco Trim Cap (For Channel Letter faces) to polycarbonate, or acrylic to polycarbonate then the one part system Channel Bond is for you!

      Channel Bond is a one part system. This means NO additional guns, nozzle tips, cartridges to purchase, in other words....NO waste, NO wasted half spent cartridges. Just pour back in the container when you're done using for another time!!!

      Resin Bond is your equivalent of Weld-On 3 & 4, used for acrylic to acrylic or acrylic to Plasco Trim Cap.

      Makrolon / Sheffield Plastics highly recommends using Channel Bond to fabricate channel letter faces with their polycarbonate!


      We can ship you one gallon of both Channel Bond & Resin Bond for $309.99 + HAZMAT & Shipping, or our combo special of one quart of Channel Bond & Resin Bond for $99.99 + HAZMAT & Shipping.



      To place an order you can buy direct from our online shopping cart LINK For inquires, full product & price list or large orders you can call us at (858) 880-1400 or email us at orders@thesignsyndicate.com


      Channel Bond a one part system that can be used in place of Lords 7550 Two-Part Urethane Adhesive, Lords 7556 Urethane Adhesive Two-Part Urethane Adhesive, Weld-On / SCIGRIP 58, Weld-On / SCIGRIP 55




    • By Erik Sine
      Have to do a plug because I'm impressed with the results. I've never used Channel Bond I've only heard the name in the past and when I heard the name I thought it was a metal adhesive of some sort.



      So I did a quick demo/sample/test of bonding Poly-carb to Poly carb in a small 90 degree angle, and I bonded PLASCO trim cap to polycarb in a letter "L". I let it cure overnight and damn it's a strong bond. I can't bend the stuff to break the bond, I'm probably going to have to have a hammer or do something very violent to break it.

      From what I understand Channel Bond is the equivalent of Weld-On 55 or 56 which is a two part system, where you need to buy the gun, the tips, the two small cartridges one of part A and B, and once you use it or activate it that's it, this seems costly. With Channel Bond it's a one part system, so you just pour it back if and when you're done, what I have is a huge Quart that will go a long way. Pretty Nice!

      What I've discovered is Channel Bond is not a West Coast Product, in fact not many of heard of it very few have. Many though it was a metal bond too, same as I, my guess is it's because Weld-On and others are West Coast because of factory locations.


      I'm sure all products and 1 or 2 part systems have their pro's and con's but...I'm impressed. So anyway, I just thought I'd post my thoughts of it.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Featured Products



  • Topics

  • Posts

    • Just a heads up, sometimes it might be best to call us and place an order over the phone.  Just noticing that sometimes the shopping cart charges too much on shipping.    It seems to confuse multiply items and doesn't know how to configure combined items by weight and dimension.  If you think you're paying too much, just call (858) 880-1400 us or shoot us an email orders@thesignsyndicate.com
    • Nikki,   I thought that we were still on the Stratus vendor list.   IIRC we recently got an rfq for this.  It's probably because our insurance renewed at the end of june and the darn agent didn't get all the coi's sent out.  Anyway, the contractor didn't specify anything about being an approved vendor but I'll let them know.  
    • Hey Rocco, unless you are an approved signage vendor for PS you can't bid new signage for them.  Currently only three companies are approved to do their Signs.  Say hi to Pam!    PS...we are surveying the entire NJ market right now but my team hasn't been able to reach out to you as it seems you are no longer an approved vendor for us.   Nikki W.
    • American Sign and Lighting is looking for an experienced Service Technician/Installer to repair, maintain and install exterior electrical & non-electrical signs and interior or exterior lighting systems. Qualified candidates must have good/clean driving record, be capable of trouble shooting electrical issues, sign installations and properly document work orders. American Sign and Lighting is a full-service sign company serving the Northern Nevada and Northern California areas for 35 years. We specialize in all aspects of the sign and lighting industry from survey and permitting to installation and maintenance. Sign experience is preferred but we are also willing to provide training to the right candidate. Must be willing to work at various heights from 10-100' from ladders or bucket truck, be able to lift 50 lbs. repeatedly, read and comprehend detailed instructions and work as a team. Must have reliable transportation, basic hand tools and all-weather clothing. Perfect opportunity for someone looking to relocate to the Reno, NV area.   Hourly wage dependent on experience. Extra for current NCCCO certification or Class B Driver’s License. Benefits include Health Care, Dental & Vision, Paid Vacation time after 6 months and more. Please submit your resume to amesignandlighting@gmail.com  for consideration. We look forward to hearing from you!
    • Accent Graphics is a full service electric sign manufacturer in the Dallas Fort Worth area since 1979.   We are in need of a full time sign design artist/graphic designer to work with the sales staff on sign design concept/presentation drawings as well as production drawings. Great benefits.   Email resumes to operations@accentgraphicsinc.com
×
  • Create New...