-
Topics
-
-
Posts
-
Our 24V France "True Power" Lighting Solution products that will power our Sign Syndicate Brighton LEDs have finally arrived and are now listed up in our Online Shopping Cart. You'll be able to power up 118 .8watt BrightON II LED Modules on a single 96W France LED Power Supply for all your channel letter and sign cabinet projects!!! That means cost savings in using less LED Power Supplies in using a 24V system over a 12V system. A 24V System also reduces the Amperage, Heat, & Resistance running across your LED Modules over a 12V system Two HUGE pluses for your projects, High-End, High Efficiency Constant Current 24V BrightON LEDs powered by True Power France Lighting Solutions Engines. -
By ledbillboard · Posted
Large outdoor LED display is a high-tech engineering product integrating multi-disciplinary technologies such as electronics, power, computer, communication, information, image processing, optics, materials and structure. The relevant engineering and technical problems in any of these subject areas will affect the final operation of the entire display. A perfect LED display must be an organic combination of multidisciplinary technologies. Led display dot matrix module driver is generally completed by a constant current driver chip. The chip includes a serial shift register, serial-to-parallel conversion and constant current driving and other functional circuit components as shown in Figure 1. The constant current chip is a conversion device that converts the luminance signal of the controller into an appropriate driving current for driving the LED to emit light. The quality factor of the constant current of the constant current device will affect the effective brightness of the Exhibition LED Display Shenzhen. Especially when the refresh rate of the display screen and the number of display gray levels are higher, the constant current chip will more significantly affect the brightness of the entire display screen. As shown in Figure 1, the supply voltage V-LED of the display will also be one of the important factors affecting the brightness, especially when the voltage is lower than the normal on-voltage of the LED, the LED illumination effect is affected, thus affecting the whole The brightness of the display. In summary, in order to solve the brightness problem in the display application, we can take practical measures including: using high-brightness chips, high light-receiving rate to select Indoor rental LED Screen, and designing pre-sufficient while ensuring white balance brightness requirements. Appropriate pixel point combination design to ensure reasonable pixel viewing angle, increase the visual contrast of the display through reasonable arrangement and structure design of the lamp; select high-quality constant current driving chip for reasonable driving current And voltage design to ensure efficient driving of LEDs. Of course, ensuring efficient LED driving requires strong R&D and technical strength. The LED video wall display china industry has grown rapidly in recent years, and has also grown up with a number of excellent display applications and display light source packaging companies, such as display light source packaging. Enterprise--Bai Shi, after years of development and growth, now has its own display R&D lab, dedicated to the research of LED display technology, and a large number of LED display application technologies in the United Nations key research institutes. research work. -
In addition to signs, we often work on lighting systems that do not have dedicated or easily accessible switches/disconnects. We find it difficult or time consuming (or need a second person with radio) to turn fixtures on and off while working on them. I am thinking that there may be a device out there that can be (temporarily) installed on the circuit(s) that can be controlled remotely via a "clicker" or phone app while staying in the truck's basket. However, there appear to be several things that need to be overcome: 1. easy install and removal - so it saves more time than it takes to install 2. code compliance, safety (locking out?) 3. sizing the device rating correctly to be able to work in most applications (480V, 50Amp, stadium lighting for instance) 4. to be small enough to carry Anyone ever seen anything like this? Are there better workarounds you are aware of? Thanks for the input. -
Northwest Sign & Design has an immediate opening for a journeyman level sign installer. Northwest Sign & Design places a high value on a positive culture of teamwork and care for employees and clients. We work hard to develop a culture of respect for all employees with a servant leadership style – the right candidate must fit well into this culture to be successful. We want our employees to go home to their families proud of what they do every day and excited to come back to work every morning. We are building our installation and service team which means there is room to grow quickly within our company for the right person. Our tools and equipment are up to date and well maintained The right candidate will have excellent customer service and problem-solving skills. Duties to include loading signage onto trucks, managing truck inventory, performing surveys, completing installation of all types of signage using a variety of equipment including buckets trucks, ladders, and lifts. Complete installations efficiently and safely. The ideal candidate will fit these traits… Be able to perform labor intensive work consistently from digging footings to climbing and working from ladders. Be able to safely load and transport signs of all sizes onto trucks and trailers. Be able to read and understand plans and scale drawings. Thrives with working under the pressure of time constraints and the unknown. Be able and confident to solve problems. Have general construction knowledge. Be safety conscious and understand safety requirements. Be flexible to keep up with a changing tasks quickly. Be proud of your work and the work of your team! Qualifications: Have clean driving record with CDL Crane certified 04 Electrical license Minimum of 3 years electrical sign installation experience. Salary depends on experience - $60,000 to $80,000 yearly Signing bonus for right candidate after 3 months $10,000 All employees receive profit sharing twice yearly based on performance. Paid holidays, Vacations, Medical and Retirement with up to 3% match -
By richard2717 · Posted
Sent you an email last week with no response
-
-
Best Sellers
-
-
Recent Product Reviews
-
(2)We've used these on a number of projects now and have been super happy with the results. The standarBy bowtievega, -
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
.thumb.jpg.594296ea97ec44780eaffd6ed6ee4447.jpg)
