Jump to content

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

Click Here

George Bush Did Not Come.


derf

Recommended Posts

This from the Denver Post:

This text is from a county emergency manager out in the central part of Colorado after todays snowstorm.

Up here, in the Northern Plains, we just recovered from a Historic event--- may I even say a "Weather Event" of "Biblical Proportions" with a historic blizzard of up to 44" inches of snow and winds to 90 MPH that broke trees in half, knocked down utility poles, stranded hundreds of motorists in lethal snow banks, closed ALL roads, isolated scores of communities and cut power to 10's of thousands.

FYI:

George Bush did not come.

FEMA did nothing.

No one howled for the federal government.

No one blamed the federal government.

No one even uttered an expletive on TV .

Jesse Jackson or Al Sharpton did not visit.

Our Mayor did not blame Bush or anyone else.

Our Governor did not blame Bush or anyone else, either.

CNN, ABC, CBS, FOX or NBC did not visit - or report on this category 5 snowstorm.

Nobody demanded $2,000 debit cards.

No one asked for a FEMA Trailer House.

No one looted.

Nobody - I mean Nobody demanded the federal government do something.

Nobody expected the federal government to do anything, either.

No Larry King, No Bill O'Rielly, No Oprah, No Chris Mathews and No Geraldo Rivera.

No Shaun Penn, No Barbara Striesand, No Hollywood types to be found.

Nope, we just melted the snow for water.

Sent out caravans of SUV's to pluck people out of snow engulfed cars.

The truck drivers pulled people out of snow banks and didn't ask for a penny.

Local restaurants made food and the police and fire departments delivered it to the snowbound families.

Families took in the stranded people - total strangers.

We fired up wood stoves, broke out coal oil lanterns or Coleman lanterns.

We put on extra layers of clothes because up here it is "Work or Die".

We did not wait for some affirmative action Fed. to get us out of a mess created by being immobilized by a welfare program that trades votes for 'sittin at home' checks.

Even though a Category "5" blizzard of this scale has never fallen this early, we know it can happen and how to deal with it ourselves.

"In my many travels, I have noticed that once one gets north of about 42 degrees North Latitude, 90% of the world's social problems evaporate." It does seem that way, at least to me.

I hope this gets passed on.

Maybe SOME people will get the message. The world does Not owe you a living.

Link to comment
Share on other sites

I got that in an email message a few weeks ago, only if I remember correctly they were talking about North Dakota and not Colorado. Not that it matters. The situation was about the same. It happens all around the north from time to time. I grew up a little south of Buffalo, NY. Our little town of 40K got more snow than the big "B", only we were not big enough to warrant national news coverage. You never heard extended news coverage about the record blizzard in Buffalo this past October where many people lost their homes and businesses and were without some "normal" services for over a month. It's just part of life up there. You either live with it and deal with it or get the hell out! Same for the Big Easy. No one is MAKING those people stay there. But it sure seems like they are paying them to!

Link to comment
Share on other sites

I dont recall the exact quote from President Bush's brother, then Florida Gov., but it was to the effect of that people in Florida have been forced to be bright enough to be set up for the hurricane that is eventually going to come. You live in that area so you should expect something to happen sooner or later.

Louisiana was not prepared for what was going to come sooner or later. Maybe next time they will be better prepared but I doubt it as they are still getting assloads of aid for the aftermath of Katrina. Colorado shouldnt have to ask for aid as they are in an area were it is bound to snow there. Here in Illinois we had nearly thirty tornadoes touch down last season, we should be prepared for the eventual tornado that will get us. Califonia should be ready for earthquake disasters. And the list goes on and on.

I am all for some assistance to make the recovery a little less stressful. However to cry foul because the people, the people city, the peoples state did not properly prepare for what was eventually coming and to blame someone else. For that I have very little sympathy.

TEastin

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Topics

  • Posts

    • It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
  • Create New...