Jump to content

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

Click Here

Electroluminescent wire offers neon alternative


Erik Sine

Recommended Posts

Electroluminescent wire offers neon alternative

EL products are cheaper to install and operate than neon lighting, as well as being more energy efficient

Electroluminescent wire and panels provide a cost-effective visual alternative to traditional neon lighting. EL products are cheaper to install and operate, cooler to the touch, more energy efficient, easier to manipulate and (almost) unbreakable. Brilliant lighting and display solutions can be provided for customers needing to create special effects in an entertainment environment, or who need to illuminate a dark area.

EL products are becoming more common in health and safety environments such as edge of step illuminators and safety clothing.

They are also being used in retail displays, architectural lighting and signage.

Rapid will be selling 26 Surelight lines, including an evaluation kit featuring a power pack and sample quantities of wire.

The wire is available in six colours - white, pink, gold, blue, aqua and lime - providing uniform brightness along the length of the wire.

The products can run on battery power for long periods, making them suitable for portable applications where mains power may not be available.

wire.jpg

This electroluminescent (EL) wire from Surelight is an innovative solution for many applications where a versatile, long-life light source is required. Utilising the latest developments in EL technology, this wire can be used in many different applications such as for safety lighting, architecture and decor, signage and retail display. Already in use in the entertainment industry in TV/film, theatre, opera, venues and nightclubs and by performance artists throughout the world.

# Available in several vibrant colours

# Available in 1.5m or 3m lengths

# Uniform light distribution across full length of wire

# Wire ø2.5mm

# Cool to the touch

# UV resistant for longer life

# Splashproof

You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Link to comment
Share on other sites

The half life of this stuff is somewhere around 10,000 hours - with extremely high grade stuff getting maybe 15,000 hours. Its long life compared to incandescent or halogen (which is a common source for small scale edgeglow fiber optics), but not in the range of neon or LED. It's also nowhere near as bright.

It's cool for safety lighting, car interiors and other oddball short life stuff - but not architectural. It's for direct view accents or effects in near total darkness, but that's about it. We've had several people come to us looking for a longer life replacement for a previous EL installation.

Edited by YYZ
Link to comment
Share on other sites

  • 10 months later...

Computers have been using LEDs for years, usually green ones to indicated power, red ones to indicate hard drive access and other colors to indicate standby, floppy access, or diagnostic activity. LEDs generally produce a single wavelength of light as low-voltage electrical current flows through the device. The colors of light available from different LEDs encompass the entire visible spectrum and even lightwaves that reach into the infrared and ultraviolet wavelengths.

By combining more than one color of LED device into a single package, you can have LEDs that produce different colors depending on the direction of the current. These are commonly used as system power indicator LEDs, since they can be green when on, yellow in standby mode and red in hibernation mode. LEDs are also used to show system diagnostics, power, and system standby status. One purpose of these LEDs mounted on your system board is to remind you that just because the system is "off", it does not mean that it does not have power! Along the lines of the system diagnostic LEDs, is memory with built-in status indicators - Corsair makes memory modules that constantly display memory access and activity while the computer is running.

Link to comment
Share on other sites

EL has a very short life compared to neon. EL also operates at voltages (I believe it is 80V) above Class 2 levels so it isnt that safe in wet environments. Usually used for short life display applications.

EL was the first light source used on PDAs, then CCFL, and now LEDs.

The stuff is very popular at Burning Man.

Link to comment
Share on other sites

The stuff is very popular at Burning Man.

Now that's a festival I want to hit. It's a little harder coming from the east coats and I wouldn't camp the whole week - but maybe the 2 days on/around the fire finale would be cool. If I had time to take away from work, we could build a kickass tent/showpiece with lighting, artwork, etc...

Link to comment
Share on other sites

Now that's a festival I want to hit. It's a little harder coming from the east coats and I wouldn't camp the whole week - but maybe the 2 days on/around the fire finale would be cool. If I had time to take away from work, we could build a kickass tent/showpiece with lighting, artwork, etc...

Not this year - but next? Maybe Marko - we could have fun. The art is pretty interesting and amazing - this place is in the middle of nowhere with no services (plumbing, water, electricity).

The rampant drug/sex scene is a little bit of a time gone by...and when you see a couple having sex on the barren flat sand in the middle of the day as people bike by and a kid on a Big Wheel circles them...ok. A lot of kids when I was there.

Perhaps the best experience was standing in the center of this massive camp and looking at an art piece and the man next to me dressed in drag seemed familiar. Hell...it was George Mueller, the ex CEO of Color Kinetics. It was odd to meet up in the middle of this...and soon after they sold their company to Philips.

Link to comment
Share on other sites



  • Topics

  • Posts

    • It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
  • Create New...