Jump to content

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

Click Here

Logan OKs electric sign ordinance


Erik Sine

Recommended Posts

Logan OKs electric sign ordinance

By Emilie H. Wheeler

Published:

Thursday, July 17, 2008 1:35 AM CDT

Logan’s elected leaders approved an ordinance regulating electronic signs just days before a moratorium on the reader boards is set to expire.

After a six-month stop on new installations, Logan businesses in the commercial and industrial zones can now put up new electronic signs — but there are new rules to follow.

Signs cannot have effects such as flashing, starbursts or animation but can have video. And while dissolving, fading and traveling text will be allowed, transitions such as scrolling and other movement are prohibited. Traveling is typically text that moves from right to left, while scrolling text moves from top to bottom.

Representatives from Young Electric Sign Company, which designs many local electronic signs, said some language in the new ordinance is confusing.

“The line is blurred and I don’t know where it stops and starts at times,” said Wes Van Dyke of YESCO. “Many of the things we think are video are actually animation.”

Van Dyke did say YESCO appreciates the middle ground the ordinance represents; many regulations in earlier drafts were more stringent than what was in the document approved Tuesday by the Municipal Council.

“I think we’ve come a long, long ways from where we were a couple months ago,” he said.

No city ordinance prior to this has addressed the high-tech signs.

Other new standards will include brightness, which will be regulated depending on which color is displayed and whether it’s day or night.

Additionally, each message or advertisement must remain on the screen for at least six seconds, except for video presentations.

Signs are limited to 48 square feet or smaller.

While new signs must comply with new rules, existing non-conforming signs have more latitude.

Councilman Steve Thompson, who was one of three to vote for the approval of the ordinance, questioned if the “offending sign,” which brought the issue to light, would even be affected by the new law.

“So, they can go back to blasting it and doing anything they want?” he asked.

Logan Senior Planner Tavis Austin said while that could occur with some existing signs, the one referenced — at about 1200 South and U.S. Highway 89/91 — had toned down its brightness for at least 90 days, which prohibits its operations in the future.

The city could make more tweaks in the ordinance, as YESCO and community development officials said they’d work further on defining language — like what constitutes a video versus animation.

Councilwoman Laraine Swenson cast the only vote against approving the document based on concerns with allowing video.

“I would really like to see us remove the video and go back to the original proposal,” she said. “I think we’re going to be sorry down the road. ... In my mind, this is the time to slowly approach this.”

Thompson joined Herm Olsen and Jay Monson, who voted for the proposal. Council Chairwoman Tami Pyfer was out of the state and did not vote.

You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Link to comment
Share on other sites

thanks for posting this article - it does show how it is going to get incredibly confusing as other cities adopt their own codes for this. It does seem odd in Las Vegas that LED billboard signs cannot use any animation but the signs on highway 15 for the hotels can...they are in Paradise. However there is an LED billboard sign in Paradise that cannot use simple animation.

Too complicated - I think getting the strippers to stand on the corner holding a sign is more effective...and hell if the sign could have neon on it (something you can see during the day time) it would be even better.

Link to comment
Share on other sites



  • Topics

  • Posts

    • It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
  • Create New...