Jump to content

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

Click Here

Loren Electric


Recommended Posts

  • Board Patron

Well, here I go again. Did a takedown (Payless Shoes) for Loren Electric, and 90 days later..... no pay. Called 'em, called 'em, called 'em, get the run around. Finally gave me their acccountants phone number - Shelly has apparently been "out" for awhile so no checks have been cut. But she's "back" now, and is supposed to be in the office in the afternoon, and they will let her know I've called.

Anyone else experiencing this?

Link to comment
Share on other sites

Yes, they are slow payers. We received half payment for a job at 85 days after threatening to sell the debt to an agency, then sold the remainder anyway for .75 on the dollar. Agencies pay the most for debt that is <30 days, so it's useful just to ask for partial payments sometimes to keep the debt current. Another tactic that depends on state law, have your lien paperwork ready and state to the sign contractor: "Look, we don't want your customer to get this Lien Notice on a sign they've probably already paid you for. It's our policy to file lien at 90 days unless we know you've sent payment." Even if your state works differently, the slow payer is not likely to call your bluff.

Link to comment
Share on other sites

NO one is paying right now. I would like to know what verbiage other sign companies are placing on their terms to cover all of the deadbeats out there. I know in PA that you are not allowed to remove a sign from someone's premises after it is installed. Any loopholes out there?

Link to comment
Share on other sites

  • !llumenati
. Any loopholes out there?

A while ago when I had an out of state install, the installer sent me a letter that I had to sign along with the property manager and store owner that basically stated that all parties are aware that if the installation was not paid for in 30 days the sign company had the rite to remove and keep the sign.

I prepaid and post dated the check for one day after the schedualed install and sent him a letter he had to sign that if the sign was not installed on the schedualed date the check would be cancelled and a new one cut deducting a daily cost.

I adopted it and worked well. This way all parties are aware. You may want to send a copy to local municipalities so you dont get arrested when taking it down, if it comes to that.

You are correct that you can not take a sign down (without permission) because once it is on the building it is not the tennants but the person who owns the building.

GOOD things happen for a reason......

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Topics

  • Posts

    • It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
  • Create New...