Jump to content

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

Click Here

Metal Worker East Dallas


Recommended Posts

Title: Metal Worker Reports To: Plant Manager

Classification: Full-Time/Non-Exempt Supervises: No one

Department: Shop Pay Range: DOE

PRIMARY PURPOSE OF THE JOB

The purpose of this job is to work as part of a lean manufacturing team to fabricate pylons, letters, cabinets, and structures from various types of metals. This position requires intermediate skills in all phases of metal fabrication.

ESSENTIAL JOB DUTIES

1. Fabricate a variety of sign types from various metals with high quality.

2. Maintain a safe working environment in the sheet metal department and assist in

enforcement of safety rules and regulations.

3. Layout raw materials using templates when applicable.

4. Use welder as needed: arc, mig, spot, stick, wire feed.

5. Be proficient in all metal cutting tools: jig saw, band saw, iron worker, plasma cutter, torch.

6. Manufacture the signs for ease of installation and serviceaiblity.

7. Inform the Supervisor of all accidents in the sheet metal department.

OTHER DUTIES

1. Participate on cross functional work teams as assigned.

2. Assist other departments as needed.

REQUIRED EDUCATION

1. High school diploma or equivalent recommended.

2. Basic understanding of electrical theory.

3. Knowledge of UL and NEC requirements preferred.

JOB REQUIREMENTS

1. Two years sheet metal experience preferred.

2. Ability to read blueprints and scale ruler.

3. Ability to learn wiring primary and secondary side of ballasts, transformers, and flashers.

4. Ability to do basic math (add, subtract, multiply, divide).

5. Ability to extend hands and arms in any direction.

6. Ability to learn lean manufacturing concepts and be an active member of lean manufacturing processes.

7. Ability to move materials up to 100 pounds with or without assistance.

8. Ability to move about to accomplish tasks.

9. Work well in a team of 2 to 6 members

10. Perform essential duties of the job without posing a direct threat to the health and safety of self or others.

WORKING CONDITIONS

1. The worker is subject to high levels of noise. Hearing protection is recommended and required for certain job functions.

2. The worker is subject to inside environmental conditions: Protection from weather

conditions, but not necessarily from temperature changes.

3. The worker will be subject to fluctuating levels of overtime, including weekends.

This job description does not list all of the duties of your job. You may be asked by managers to perform other tasks and duties. You will be evaluated in part based upon your performance of the tasks listed in this job description.

Management has the right to revise this job description at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason.

Apply by e-mail to: Humanresources@imagenational.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Topics

  • Posts

    • It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
  • Create New...