Jump to content
Show header slider

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others
Click Here

Carmel, CA

Guest Signtiffic

By Guest Signtiffic
in Government Legislature & Regulation

 Share

Recommended Posts

Guest Signtiffic

Guest Signtiffic

Posted
Posted

I have not read the municpalities code yet but I heard they don't allow illuminated pylons or monuments? Anyone do any jobs there recently?

Erik Sine Master Engineer

Erik Sine

Posted
Posted

I have not read the municpalities code yet but I heard they don't allow illuminated pylons or monuments? Anyone do any jobs there recently?

That's not surprising.

I have not been there in over 8 years or so but Monterey & Carmel CA are for the most part touristy sleepy fishing towns off the scenic route highway 1. If you do a google map standing view in their downtowns you will see that they are mostly wall paints, awnings, blade, and wooden cedar sandblasted signs.

The only thing you might see lit up are neon and LED open signs.

You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Guest Signtiffic

Guest Signtiffic

Posted
Posted

I thought it wasn't worth looking up the code. If that's what it was 8 or so years ago it's likely very similar to or with tighter restrictions. Also, it tends to be true for nearly anywhere.... looking around at the signs others establishments have on the same road tend to reveal what is and is not allowed.

Thanks Erik.

  • 3 months later...
Guest Signtiffic

Guest Signtiffic

Posted
Posted

Thanks Goat! I didn't even know about codepublishing.com and it will be a nice addition to my code research staple municode..... amongst a nice list of municipal contacts and websites.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Topics

  • Posts

    • Erik Sine
      The BrightON IV Pylon Sign Retrofit

      By Erik Sine · Posted

      The High-End Top Tier Brighton-IV Constant Current LED Module for Sign Cabinets & Large Channel Letters for when you want strong Competitive Light NOT, usable light!    The BrightON IV Module as low as $75.00 per bag in small case quantities with FREE SHIPPING       The Existing Pylon Sign 44"H x 17'L x 18"D Existing Fluorescent HO Lamps spaced 12" OC as per usual Electric Sign Industry Standard     In this simple low cost Retrofit no need for high cost proprietary tracks, clips...just simple aluminum stock you already have in your shop for sign fabrication. $85 worth of 1-1/2” x 1-1/2" angle, 3/4” square tube       1 hour of using self-tapping screws to attach the 1.5" x 1.5" Aluminum angles to the top and bottom of the Pylon Sign and adding in the vertical aluminum bars to where the HO Fluorescent lamps once were.   HO Lamps 12” OC Center. 18 Rows, 144 1.6w B-IV Modules, three 96w France TruPower LED PSU’s for the B-IV Modules.      The result???.....Godly Light that tears into Daylight! Brighton - IV LEDs Powered by France TruPower 100% Loadable LED Power Supplies         Again, the Aluminum angles in this project cost came to $85 total!   No Need for high cost proprietary bars, clips, holders.... just use the angles your custom sign shop typically already have in stock for Sign Fabrication.    With the BrightON IV Spacing the module cost for double sided projects come to $3 per foot.   High Efficiency LED Modules (180 l/w) for more light per power, Constant Current NOTConstant Voltage for Consistent / Even Lighting & Longer Life.  24V instead of 12V for half the current which results in half the heat and resistance.     You can purchase the BrightON IV Modules from our store (Here), and in small case quantities $75.00 per bag of 60 as well as our preferred France Lighting Solutions LED Power Supplies which include FREE SHIPPING all across the Continental US Only! ...or feel free to phone in your order (858) 880-1400    
    • Rocco
      Fairmont signs

      By Rocco · Posted

      IDK if they still have Napa.  This was for sandwich chain.   I won't trust them unless someone can give a recent good experience.
    • plyda
      Fairmont signs

      By plyda · Posted

      That is a blast from the past.... Do they still have the Napa Account?
    • Rocco
      Fairmont signs

      By Rocco · Posted

      Does anyone have any new info on Fairmont?   They requested a service call and even said they would pay by CC the day of service.    TBH i still won't take the work but maybe things have changed.   The PM mentioned a new owner, but I'm doubtful because that's an old story with some companies.  
    • Rainbow Sign and Banner
      For Sale: 2023 SDS Automation ChannelTrimmer - Like New, Low Use

      By Rainbow Sign and Banner · Posted

      If you’re looking to upgrade your channel letter production workflow, this 2023 SDS Automation ChannelTrimmer® is an exceptional find. It’s in like-new condition, has very minimal hours, and is fully operational. Perfect for shops looking to improve efficiency, accuracy, and production speed. Key Features & Capabilities Automated trim cap processing system designed for precision and consistent output Automatic outside corner notching Marking inside corners for perfect alignment Eight angle notching tools (45°–120°), creating sharp, clean edges on every letter Measures all distances with remarkable accuracy for consistent fabrication Works with industry-standard 150' coil cassettes Compatible with all channel letter benders, not just SDS ChannelBender® units Designed to increase productivity and reduce labor time Condition Like new — purchased in 2023 Extremely low use Fully tested and works perfectly Clean, well-maintained, and ready for production Technical Specs Power: 220VAC, 15A, 50/60Hz System Dimensions: 63" W × 26.75" D × 53.25" H Supported coil heights: 1", 1.5", 2" Material thickness: Up to 0.04" (1.0 mm) Asking Price $38,000 (negotiable) Shipping / Pickup Located in St. George, UT Buyer responsible for freight (I can assist with arranging shipping if needed) Loading help available
×
×
  • Create New...