Jump to content

ELECTRIC SIGN SUPPLIES

If You're Looking For Premium Electric Sign Industry Components Like Trim Cap, LED's, USHIO LED Lamps, Neon Supplies, or LED Power Supplies, Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!

Buy Now

NATIONAL SIGN & SERVICE COMPANY REVIEW LIST

For Sign Company's Who Work As Subcontractors

Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

You Must Be A Registered Member & A Subcontractor
Click Here

MEMBER LOCATION MAP

Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call? Locate a Supplier or Advertiser Regarding Thier Goods & Services?

Become a Member & Upgrade Your Free Membership So Others Can Locate You
Click Here

Recommended Posts

  • Board Vendor II

Good morning all,

We at MCS supply joystick controllers for aerial lift, cranes, bucket trucks, scissor lifts and boom lifts to name a few. If your looking for a joystick and want to save some money give us a call.

928 775-4918.

Thanks,

BOOM TRUCK FLIER DUN72.pdf

MCS Industrial

Your Number #1 Source for New and Rebuilt Joystick Controllers for Bucket Trucks, Cranes, Boom Lifts and Scissor Lifts...WORLDWIDE

Link to post
Share on other sites
  • Board Patron

Great people to work with. We have purchased new ones and have had them do rebuilds.

Installation & Maintenance Services

Brian Phillips | expresssignandneon@sbcglobal.net | P. 812-882-3278

Express Sign & Neon | 119 S. 15th Street - Vincennes - IN 47591

express%20neon%20sig.jpg

Link to post
Share on other sites
  • Board Vendor II

Brian,

Thanks for the reply, great doing business with you.

We appreciate your business.

Have a great day,

Ben

MCS Industrial

Your Number #1 Source for New and Rebuilt Joystick Controllers for Bucket Trucks, Cranes, Boom Lifts and Scissor Lifts...WORLDWIDE

Link to post
Share on other sites
  • Board Vendor II

We charge $80.00 labor plus parts to rebuild most controllers, do you know what part number your controller is? If it is 87200351 Skyhoist controller they usually run about $225.00, we sell them new for $260.00.

Thanks for the inquiry, have a great day.

Ben.

MCS Industrial

Your Number #1 Source for New and Rebuilt Joystick Controllers for Bucket Trucks, Cranes, Boom Lifts and Scissor Lifts...WORLDWIDE

Link to post
Share on other sites
  • Board Vendor II

Hi Keith

MCS Industrial Electronics Inc. has been in the business of rebuilding and manufacturing joystick controls, for countless types of equipment, for more than 30 years. We offer a 100% satisfaction guarantee on all of our products. We are product liability insured, and have numerous happy customers in the sign industry, one of them is Yesco. We would be happy to email a list of referrals to you if you would like us to. We offer free technical assistance for joystick-related matters. We have hundreds of joysticks in stock for same-day shipping. For more information about our company, please visit our website mcsindustrial.com. Our salesman is Ben. His direct email address is mcssales@cableone.net. If you would like to call us, our phone number is (928) 775-4918

Thank you for your interest in our company!

Frank Camp

President, MCS Industrial Electronics Inc.

Link to post
Share on other sites

We have ordered from them with satisfaction met in every department, ordered online with no problems, part showed up a few days later. I Highly recommend MCS!

Link to post
Share on other sites
  • 2 months later...

i have a bucket truck joysticks that causes hydraulics to engage very weak. I can see the lower controls vibrate trying to engage when i activate the joystick. Would this be a joystick problem?

Link to post
Share on other sites
  • Board Vendor II

Hi John,

Do all the joysticks have this symptom, or just one of them?

Regards,

Frank

Link to post
Share on other sites
  • Board Vendor II

Ah, okay. It could be as simple as adjusting the output trimpots. You can call me at (928) 775-4918 and I will be glad to help you with the adjustment procedure. I am here from 7:00 am to 3:30 pm. Arizona time.

I look forward to helping you.

Frank

Link to post
Share on other sites
  • Board Vendor II

Hi John! I am so glad I was able to save you $260.00 by helping you adjust the trimpots on your joystick controller! In just 5 minutes you were up and running! If you have any other questions or need any technical assistance with your Elliott joystick controllers, don't hesitate to call!

Frank Camp

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Shamrock
      2007 Manitex SC62 with (NEW 2 man basket) jib winch and sign forks. Current OSHA boom certification (will have a NEW 1 year certification upon sale)!  Mounted on a 2007 International Maxforce GDT225 7.6L  roughly 113000 miles on truck and climbing.   Truck was DOT inspected in Sept 2019 and has a current Pa state inspection.  33000 GVW. Lift capacity is 6000 pounds, 360 continuous rotation, hydraulic basket rotation and leveling. welding leads and power in basket. Welder in pics available for extra $$$ extended lamp storage under bed. aluminum step bumper with trailer hitch. 
      New aluminum basket, step bumper, load line, tires, inter cooler, breaks: all within the past 2 years. 
       
       This unit is work ready!!! 
       Possible delivery east of the Mississippi (for a fee) 
       Clear Pa title 
       Call with questions 412-779-3047  leave a message. 
       
       $53,000 OBO shoot me an offer you'll stand behind! 












    • By Reach-All LLC
      CraneMate VS gravity leveling work platforms.  "Increased safety and productivity" are just a few words to describe how superior the state of the art CraneMate is to any of the existing gravity leveling work platform attachments.  In fact, the CraneMate is often equal to or better that the man-lift platforms being offered today. 
      Safety Feature: The CraneMate has auto-hydraulic leveling which automatically levels the platform with it's payload inside as the boom truck articulates up and down even when the platform jib winch or platform forks are supporting a sign. Safety Feature:  The CraneMate has 180 degrees of hydraulic rotation enabling the platform to be positioned parallel to the work area. This prevents back injuries due to stretching and reaching out by one man from the corner of the platform to hold or work on hard-to-reach jobs. It also allows the platform jib winch or platform fork to precisely position and place the payload.  Productivity: The combination of leveling, rotation, jib winch and forks allows one man versus three to get the job done in record time.  Depending on platform size, the 10' long CraneMate can accommodate two to three men, tools, and a large load of channel letters to make one trip up and install the works.  Productivity: Reduces travel time by often completing the job in one trip which often requires two or three with a gravity leveling system.    Productivity:  The platform can be installed and stowed permanently on the boom truck for road travel, reducing job setup time.    



    • By dave C.
      2007 Manitex SC62 on 2007 Ford F750
       
      Dave 217-254-0029
      2 man bucket with remote controls
      Bucket jib w/500lb. capacity
      Torch and welding cables at bucket
      120v receptacle at bucket
      Tube box behind cab
      Torch and hose utility box
      2- under bed storage and tool boxes
      2007 Ford F750 with Cummins engine (98,800 miles)
      2017: New Transmission (Allison automatic) w/warranty
      2017: New main pump on Crane.
      2017: New Rear end and Brakes
      Jan. 2018: New water pump
      Numerous other repairs documented, a number of hoses replaced.
      Complete service file
      Call Dave 217-254-0029














    • By CTSIGN
      Connecticut Sign Service seeking a full time sign installer / service technician.
      Clean DMVR Full Time, must be willing to work overtime as needed Competitive Benefits  
      Required experience:
      Sign Installation 5 years min.  
      Connecticut Sign Service, LLC 
      Deep River, CT 06417
       
      Email John@CTSIGN.com with resume
       
      visit www.CTSIGN.com to see examples of our work.
    • By Erik Sine
      Damn, 190' platform for their new E190 That's insane. Speed over to 2:18


      Wireless Remote

      The Rig

      Platform

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Featured Products



  • Topics

  • Posts

    • We continue to grow and grow.  We are in search of another Field Service Technician.   You can learn more and apply now at: https://www.ziprecruiter.com/job/1d60d158
    • Any chance anyone out there has an older Watchfire EMC they've removed with a phone modem?  Our city has a board we installed back in 07 and the board works great, the phone modem is just shot.  Watchfire is no longer making that hardware.     Thanks!
    • Most LED MFG's will just suggest layouts and tell you how many LEDs per foot without telling you how their LEDs will match up against the Standard Lighting in our industry which is Fluorescent HO Lamps.  If you haven't done any lighting for cabinets or never noticed, most fall short of even meeting the luminance that Fluorescent lamps give out on a sign face.   The light that falls short is known as "Usable Light", or light that just gets you there.  It's not Competitive lighting that you would need if your sign I located in a shopping center in competition with other signs looking to be noticed.   So here we have our new BrightON II....       The conventional Fluorescent HO (800ma High Output) Lamp light output is the standard in the Electric Sign Industry.  When loaded, configured, and installed correct with no cross talk, these lamps and ballasts are a VERY good light source that last for years.   Our High Efficient High-End BrightON IV HO LED modules match the light output of Fluorescent HO lamps of our longtime Electric Sign Standards in lighting applications.  More Light for Lesser Power   The Brighton IV LED is Constant Current, uses a High Efficient chip for illumination, mounted on a Aluminum PCB for better thermal cooling...not that we need Aluminum for a chip that is already under driven and produces less heat & resistance due to operating on a 24V System.   With the BrightON IV you'll save money in project costs over buying specialized proprietary channels/bars (Another reason for a sale) by simply purchasing some right angle aluminum channels for the top and bottom of a sign cabinet, and placing aluminum tubing in between to mount your High-End low cost BrightON IV LEDs on.         Double Face Sign Test Cabinet  4’ x 4’ x 12” D Module to face 5” Sign Face 3/16” Plexiglas MC White #7328       Fluorescent HO Lamp System Lamps in single and double faces cabinet fabrication typically are spaced 12” OC (On Center) Sign Face Luminance: 156.5 Foot Candles Power Consumption: 126 Watts     BrightON IV Double Face Sign Cabinet Spacing.  8” OC Module to Module, 12” OC Between Rows for Module to Sign Face in depths of 5” or 3” 5” Module to Sign Face Luminance: 156.5 Foot Candles 3.5” Module to Sign Face Luminance: 164 Foot Candles Power Consumption: 76.8 Watts   126 Watts - 76.8 Watts = 39% Savings in Energy Consumption   Single Face Spacing Suggestions 5” Depth, 9” - 9.5” spacing between rows, 7.5” - 8.5” spacing between modules 3” Depth, 8” - 9” spacing between rows, 8” - 9” spacing between modules     BrightON IV Usable Light Spacing If you want and need "Usable Light", here it is...some cases call for it.  This lighting would be slightly brighter than Hanley's NRG4.   Double Face Sign Cabinet Spacing.  9.5” OC Module to Module, 12” OC Between Rows for Module to Sign Face in depths of 5” or 3” Sign Face Luminance: 134.5 Foot Candles Power Consumption: 64 Watts   126 Watts - 76.8 Watts = 49% Savings in Energy Consumption         Why use the BrightON IV LED?   • For starters it's Constant Current unlike using Principal LED's Constant Voltage Qwik Mods or others.  Constant Current means each module is current regulated with translates to longer life.   • It's a 24 Volt system, which means our system has half the current running through the wiring and board which translates to half the heat & resistance of a 12 volt system.  In other words....Longer Life.   • With a 24V system you're able to use more LED modules on a single 96W channel over a 60W channel.       BrightON IV Aspects     24V High Performance, High Brightness LED Module Half the Amperage, Less Heat & Resistance than a 12V LED Module Aluminum PCB 40 Modules Per Bag 32.5’ (Full Stretch) 1.23 Modules Per Foot Constant Current Regulated, NOT Constant Voltage 175˙ High Efficiency Uniformity Optics 5 year, 50K Lifetime U.L. File E520387         For Inquiries or Orders you can contact us at (858) 880-1400 | orders@thesignsyndicate.com | order through our online Shopping Cart below        
    • SDS Automation is seeking a full-time parts manager with 3-5 years of experience to manage our parts department in our Boulder, CO location. To learn more about this great opportunity and apply for the position, click here: https://www.ziprecruiter.com/job/79b352df  
    • I can only speak for myself but.....I'd be embarrassed to be listed in the newest Signs of The Times June Issue of "Women In Signs"   For as long as I've been in the Sign Industry, and that's since the Spring of 1993...Women have always been in STRONG and POWERFUL positions in the Sign Industry from Sales, Project Management & Ownership.   This Sign Brochure and Rag does (which is what it is slowly creeping back too) nothing more other than Handicap Women.    Women don't need a special issue, trophy, notoriety to underline their "doings" or "Accomplishments", they've been doing it for decades and as long as I can remember.  Well, at least the "Spartan" like Women I know of this industry.  We live in a Merit driven society and we're always judged/advanced by our own production and accomplishments based on our own individual efforts, that's what this country grants us no matter our gender, religion, or background....and we have NO ceiling or cap.     There may be a few in our industry that feel like they can't make it in the world without some sort of handicap, or cut in line because of their gender, religion or background....but I don't know them...well, I'll walk that back...I know a few...VERY few.       I don't know what this rag is trying to get at with this issue, but it's really NOT a Sign of The Times...it's really "Behind the Times".    An article of "The People of The Sign Industry" would be a far better read, and across better merit base rather than "gender" victimization.....Finding content to write about must be slow right now.  
×
  • Create New...