For Sale: 2007 Manitex SC62 on 2007 Ford F750 Low mileage
By
dave C., in Classifieds
-
Similar Content
-
By Reach-All LLC
CraneMate VS gravity leveling work platforms. "Increased safety and productivity" are just a few words to describe how superior the state of the art CraneMate is to any of the existing gravity leveling work platform attachments. In fact, the CraneMate is often equal to or better that the man-lift platforms being offered today.
Safety Feature: The CraneMate has auto-hydraulic leveling which automatically levels the platform with it's payload inside as the boom truck articulates up and down even when the platform jib winch or platform forks are supporting a sign. Safety Feature: The CraneMate has 180 degrees of hydraulic rotation enabling the platform to be positioned parallel to the work area. This prevents back injuries due to stretching and reaching out by one man from the corner of the platform to hold or work on hard-to-reach jobs. It also allows the platform jib winch or platform fork to precisely position and place the payload. Productivity: The combination of leveling, rotation, jib winch and forks allows one man versus three to get the job done in record time. Depending on platform size, the 10' long CraneMate can accommodate two to three men, tools, and a large load of channel letters to make one trip up and install the works. Productivity: Reduces travel time by often completing the job in one trip which often requires two or three with a gravity leveling system. Productivity: The platform can be installed and stowed permanently on the boom truck for road travel, reducing job setup time.
-
By benmcs
Good morning all,
We at MCS supply joystick controllers for aerial lift, cranes, bucket trucks, scissor lifts and boom lifts to name a few. If your looking for a joystick and want to save some money give us a call.
928 775-4918.
Thanks,
BOOM TRUCK FLIER DUN72.pdf
-
-
Topics
-
-
Posts
-
Custom electric sign company on business for over 25 years seeking a shop foreman to join our team who knows how to build custom electrical signs. experience with LED, neon , steel aluminum, capable of welding and sheet metal fabrication Experience is a must. please apply by email to: info@bksigns.com -
Like new Roland VersaCamm VS640 printer for sale - prints white & metallic inks - it needs a print head, but other than that, it is in immaculate condition. You can't even tell we have printed on it I have kept it so clean. I think it is about 7 or 8 years old. We are getting a new printer, so I have to get this one out of the way before we can set the new printer up. Will come with all of the RIP Software (Roland VersaWorks) - Excuse the dirty floor! Had a large project going on in here so I haven't had time to clean! LOL Make me an offer. -
Most Light Source Suppliers and Manufacturers won't show you examples let alone "numbers" of light readings on Sign Cabinet or Sign Projects from light source components they push like these I'm posting here, but....This is The Sign Syndicate! "Seeing is believing" as they say. So, one of the components I've been big on because of feedback and demand is a strong enough LED module that doesn't cost an arm and a leg, isn't proprietary where you need to buy their special clips, brackets, etc, and actually put out enough light without exaggerated "Usable Light" under too far spread spacing that's supposed to save you money that won't compete with other existing signs in the area of your project. Biggest complaint from sign shops about cabinet LEDs....."I don't want to use a whole bunch of power supplies!" You want your clients sign to stand out, NOT be lost or drown out by other neighboring signs also competing for attention and visibility. Most importantly, the BrightON Sunfire LED keeps it simple by allowing custom sign shops not having to pay enormous amounts of money. I've discussed our upcoming new High-End Sign Syndicate BrightON Sunfire LED for Cabinets, Slim Cabinets, and Large Channel Letters before. But I've never had an opportunity to back it up with facts by illustration until now. Let's start with our industry long time standard light source components first. That is good ol HO T12 Fluorescent Lamps. Unlike our industry suppliers and manufacturers I'm not going to bash the use of HO Lamps, they work good, and they do last a long time despite their marketing claims of failure just to sell another light source. There are some very well High-End made HO Lamps for our industry. Back to the project. Here we have your typical 4' x 4' x 12" double sided cabinet that we would either see on a pole or mounted on the ground. 3/16" 7328 Plexiglas MC acrylic face. Using industry standard spacing of lamps at 12" spacing. HO Lamps 6" in from the sides and 12" from lamp to lamp powered by a energy efficient electronic ballast pulling about 126 Watts With four HO 4' lamps with 12" spacing we have a average Foot Candle average right on the sign face of 156.5 FC This is, and has been our industry average for sign surface lighting for DECADES. Here is our High-End Sign Syndicate BrightON Sunfire (pronounced just like the city) A 3 watt LED module with a 170˙ High Uniformity Optics with over 420 lm Most importantly it's 24V system, and Constant Current.... NOT Constant Voltage. This system has reduced amperage, heat, and resistance running across it compared to a 12V and it has more voltage head room for long runs. This calculates to longer life. On a 24V system this means loading more modules on a 96W power supply than a limited 60w power supply of a 12V system. Less moving parts on a project the better. Below and as illustrated we spaced our modules the same as HO Fluorescent Lamps. 6" in, 12" from row to row and one Sunfire Module per foot, spaced 12" apart from one another One thing I wanted on our Sunfire modules were longer wires between each module. You have enough wire (15") to jump from row to row without having to splice...less labor involved and it gives you more room to do what other tasks you may need to do with longer wiring. Using modules like our BrightON Sunfire makes your projects at so much of a lesser cost. Instead of buying special proprietary clips, tracks and mounting brackets just purchase inexpensive alum 1/16" or 1/8" angles and channel for mounting. These typically can be bought in 8', 16', and 24' lengths. The results.....196.5 Foot Candle average on the sign face surface, a 26% brighter face What makes the BrightON Sunfire even better? Adding a True Power France Lighting Solution 24V LED Power Supply. True Power means having the ability to load 100% of a load on a power supply. As you know most power supplies are asked to load to 80%-85%. Not so with France, 100% if need be. Most competing cabinet 12V/24V LED modules will run you anywhere from $7.00 to $15.00 per module. The BrightON Sunfire will only run you $3.75 per module, giving you NOT "Usable Light" but "Real Competitive Light" as illustrated here.....26% brighter, over above our industry standard lighting of T12 HO Fluorescent Lamps!! -
Our 24V France "True Power" Lighting Solution products that will power our Sign Syndicate Brighton LEDs have finally arrived and are now listed up in our Online Shopping Cart. You'll be able to power up 118 .8watt BrightON II LED Modules on a single 96W France LED Power Supply for all your channel letter and sign cabinet projects!!! That means cost savings in using less LED Power Supplies in using a 24V system over a 12V system. A 24V System also reduces the Amperage, Heat, & Resistance running across your LED Modules over a 12V system Two HUGE pluses for your projects, High-End, High Efficiency Constant Current 24V BrightON LEDs powered by True Power France Lighting Solutions Engines.
-
By ledbillboard · Posted
Large outdoor LED display is a high-tech engineering product integrating multi-disciplinary technologies such as electronics, power, computer, communication, information, image processing, optics, materials and structure. The relevant engineering and technical problems in any of these subject areas will affect the final operation of the entire display. A perfect LED display must be an organic combination of multidisciplinary technologies. Led display dot matrix module driver is generally completed by a constant current driver chip. The chip includes a serial shift register, serial-to-parallel conversion and constant current driving and other functional circuit components as shown in Figure 1. The constant current chip is a conversion device that converts the luminance signal of the controller into an appropriate driving current for driving the LED to emit light. The quality factor of the constant current of the constant current device will affect the effective brightness of the Exhibition LED Display Shenzhen. Especially when the refresh rate of the display screen and the number of display gray levels are higher, the constant current chip will more significantly affect the brightness of the entire display screen. As shown in Figure 1, the supply voltage V-LED of the display will also be one of the important factors affecting the brightness, especially when the voltage is lower than the normal on-voltage of the LED, the LED illumination effect is affected, thus affecting the whole The brightness of the display. In summary, in order to solve the brightness problem in the display application, we can take practical measures including: using high-brightness chips, high light-receiving rate to select Indoor rental LED Screen, and designing pre-sufficient while ensuring white balance brightness requirements. Appropriate pixel point combination design to ensure reasonable pixel viewing angle, increase the visual contrast of the display through reasonable arrangement and structure design of the lamp; select high-quality constant current driving chip for reasonable driving current And voltage design to ensure efficient driving of LEDs. Of course, ensuring efficient LED driving requires strong R&D and technical strength. The LED video wall display china industry has grown rapidly in recent years, and has also grown up with a number of excellent display applications and display light source packaging companies, such as display light source packaging. Enterprise--Bai Shi, after years of development and growth, now has its own display R&D lab, dedicated to the research of LED display technology, and a large number of LED display application technologies in the United Nations key research institutes. research work.
-
-
Best Sellers
-
-
Recent Product Reviews
-
(2)We've used these on a number of projects now and have been super happy with the results. The standarBy bowtievega, -
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
(1)Well, we just bought the LED Utopia S14 bulbs for one of our customers - he has chasing lights on hiBy HansonSigns,
-
.thumb.jpg.594296ea97ec44780eaffd6ed6ee4447.jpg)
