Jump to content

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others

Click Here

Electronic signs to say goodbye?


Erik Sine

Recommended Posts

Electronic signs to say goodbye?

Wed, May 16, 2007

By TONY BAUGHMAN

Staff writer

The City of Aiken may be about to pull the plug on electronic signs.

The Planning Commission voted unanimously Tuesday to recommend that City Council prohibit all flashing and pulsating signs, including those that use light-emitting diodes (LED), liquid crystal display (LCD), plasma and other digital technology. Council is expected to consider the zoning amendment at its first June meeting.

"The reason for this is that this is a rapidly growing technology that has major aesthetic and safety impacts that we don't understand," said Commission member Bill Reynolds in making the recommendation, which was quickly seconded by fellow commissioners Ed Giobbe and Wilkins Byrd. "The electronic sign is in its infancy. In Aiken, there are somewhere around five within the city limits, and until we do understand it much, much better, we feel the prudent course is to prohibit all electronic signs inside the City."

Previously, the City had allowed illuminated signs that provided "public service information such as time, temperature, date, weather or similar information intermittently with low intensity lights." If passed by City Council, the new ordinance revisions would effectively darken several familiar signs, such as the one owned by Bank of America at the corner of Laurens Street and Park Avenue.

Other organizations, including St. Mary Help of Christians School, had come to the City in recent weeks asking for permission to erect new electronic signs.

According to Planning Commission chairman Ed Woltz, though the proposed ordinance revision would block such signs, he said, "I do think we need to come back and revisit this because I don't think we have enough information on electronic signs at this time. But in order to protect the City at this point, we need to just put a moratorium on them until we can get more information and review this more in depth."

In other action, the Planning Commission:

* recommended that the City annex 29.7 acres along Huron and Moultrie drives, adjacent to Gem Lakes, for a new 34-home subdivision;

* recommended that the City deny rezoning of 3.76 acres on Spencer Drive adjacent to the Aiken Exchange shopping center as multi-family, where an Augusta developer wanted to build an apartment complex;

* approved a request by Woodside Development to name the proposed road into the Village at Woodside as "Village Green Boulevard"; and

* recommended that the rear portion of a lot on Marion Street be included in the Historic District.

You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Link to comment
Share on other sites

Another set of boneheads with politcal power and here is what they are doing to us :nutkick:

Yup. I assume this is Aiken, SC because Augusta (GA), which is also mentioned, is right next to Aiken across the Savannah River. Bunch of damn good 'ol boys trying to run things.

Link to comment
Share on other sites



  • Topics

  • Posts

    • It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
  • Create New...