Jump to content
Show header slider

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others
Click Here

I shave my back! :~)

Guest Signtiffic

By Guest Signtiffic
in General Message Board

 Share

Recommended Posts

Guest Signtiffic

Guest Signtiffic

Posted
Posted

Here's a public rant for the record books.... bitches.

Yes... yes... I shave my hairy back. Actually my wife does. I even plucked hair out of my knuckles before because I was sick of looking at it.

I went to a parochial school with a bunch of bigots. I came out not being prejudice and still have a God.

I've been in the sign business for years... and I pay attention.... which means I learn more than you faster than you.

Yes... my ego is bigger than yours.... but it's based on fact and I frankly don't care if you like it or not.

Yes... I've been bullied... cried... retaliated for the wrong reasons... and have had my ass kicked. Where do you think I learned how to fight?

I've likely pee'd in public more than anyone here... including pissing in your cornflakes.....

I'm a serious mother mother most of the time with a yard full of dick, bucket full of balls, and enough hair on my ass to weave an indian blanket. I can still tell a funny joke.

I may be richer than you, but I'm not better than you. You may be richer than me but you're not better than me.

I don't fight fair because it's never fair fight. I do fight with passion which is more than most can say about any of your real posers who only bitch on a part time basis and don't ever back it up.

I've quit more jobs than I've been fired from and regardless if I was fired or quit it was based on backing up my values. I can stand up for what I believe in while most of you can't stand up to pee.

I read both sides of the story while you just "follow" someone else who has their claws in you.

I enjoy the fact my knowledge is mis-read as ego. Not everyone can evovle their mind and the ego label is a great way to pretend I'm shoving an opinion down your throat instead of realizing what really happened.

I'm pretty conservative.... but I'm pretty liberal. Know what that means? I'm not stuck in the past or fighting the future.

Mis-information is a two way street.... you think you've got me figured out? HA... you don't have a clue.

Thank you for listening to my rant. Why don't you stop now and go pay some respect to people who have sacrificed their lives for this great country of ours. It's a much more worthy cause than hearing me give you something you already don't know.

Let the predicatable comments come... I'd love to see a suprise one or two as well. Those are always entertaining.

Love you boneheads.... you're in my thoughts... rarely.

Link to comment
Share on other sites
Erik Sine Master Engineer

Erik Sine

Posted
Posted

And you posting this thread which you didnt have to do tells me, or reaffirms.

That under that big thick hard undercoat, exterior ego, you have a BIG, warm fuzzy side and heart to you, that can bleed.

Sent from my iPhone using Tapatalk

You have enemies? Good. That means you've stood up for something, sometime in your life. - Winston Churchill

Link to comment
Share on other sites
Guest Signtiffic

Guest Signtiffic

Posted
Posted

I didn't ever say I wasn't human. Didn't say I wasn't a softie with a big heart. Didn't say I was invincible. Didn't say I can't be wrong. But, when you're right you're right..... when it's wrong... it's wrong.

Regardless I've got something to do tommorrow. Bleeding isn't one of them. :draw2wc:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Topics

  • Posts

    • Rocco
      Mounting Signs On EIFS

      By Rocco · Posted

      It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Johnny
      Fs: New Neon Manifold - $825

      By Johnny · Posted

      Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Erik Sine
      Mounting Signs On EIFS

      By Erik Sine · Posted

      Toggle bolts
    • PhoenixStucco
      Mounting Signs On EIFS

      By PhoenixStucco · Posted

      Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Rocco
      Pepsi logo vinyl colors

      By Rocco · Posted

      Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
×
  • Create New...