I am trying to replace an obsolete neon transformer on a bar light and cannot seem to find anyone who can confirm what modern transformer will work as the proper replacement. That's why I came here to the experts!
I've attached a photo of the old indoor gas tube transformer.
I believe it says it's an Actown Model No. FG 3851.
PRIM 120 Volts 60 Hz 270VA
SEC 9,000 Volts 30 MA
Secondary Mid-Point Grounded
I believe Actown was bought by Franceformer years ago.
Can anyone offer any insight on what a solid replacement transformer for a bar neon would be?
Any info. anyone can provide would be greatly appreciated.
By UFB Fabrication
Just opened and skimmed the latest SOT article about channel letters. 1st off if anyone looks at the mag you can seen its loaded with channel letter bending machines ads that have really increased ad space this month. Hmmmm. Well once again the said that ground breaking technology has come to the channel letter market. Yes it is if this article was written 15 or 20 years ago. Nothing new has been come up with for years and most anyone who makes channel letters seriously bought a bender years ago. While automated bending is great and with a clincher or stapler is better than doing it by hand its really only 20% of building a letter. Still have to slap some LED's in it which are of course the modern miracle of the sign world. Add a bit of trim cap and viola you made yourself a set of letters. Never mind the other equipment needed, permits or UL . Its pretty plain to me that this is typical of SOT of telling a "story" that includes/benefits a advertiser, shame on them. Looking more like fakes news
By Erik Sine
Hi Guys & Gals.
Posting a video sent from one of our members that need help in defining the issue. Usually seen and requiring longer burn in, but any idea why it would happen over an extended time?
Hopefully some of the Neon folks can chime in
By Erik Sine
Thought I'd post some pics of a project I recently put up for a group of owners I've been doing some signs for over 15 years, this is the latest project located here in San Diego in Pacific Beach California.
This job was supposed to be up last December, but as you can imagine things don't happen over night like they should in for this project in California and a good reason why business's leave California for other fruitful states in our grand union.
This project was no different and unlike other states.....here,anything built on the beach, you have to go through the California Coastal Commission. This establishment won't be ready after much delay until almost a year later, and set to open this November possibly December.
This project was originally composed of a third sign, a 18' tall projecting sign which got denied in the permitting process. Can't get them all in California I guess you can say.
So we're left to be happy with what THEY allow us to have.
Anyhow, this project is two 4' x 20' Electric wall sign cabinets, 1/8" alum walls and 3" deep open face channel letters spaced 1.5" from the cabinet background. 18mm Tri-Phosphor Voltarc Accent 30 border, and Voltarc 15mm Rare Earth Phosphor Sparkling Blue Letter outline lighting. The owners wanted a halo lighting similar to a previous job so we used Our NC LED's Constant Current Green LED Modules for low light subtle Rear Letter Halo Lighting.
All Lighting Powered by Franceformer's for Neon, and our Union Elecom for the driving the NC Green Constant Current LED's
A big thank you to Joe Walsh of Voltarc for helping us get what was needed for this job, the Neon is Brilliant and of course stands out over the beach night city scape. This Beach won't be needing a light house for lost fisherman after all now thanks to Voltarc!
There aren't very many Neon signs on this coast that I know of, in fact....I can't think of any so these signs are a real beacon. They must be because the owners asked me if after installation and first lighting if I could hook up a dimmer......" a wut??!?!"
Early assembly shots
And a shot of our LED Wall Pass Thru System
A solo illumination shot of our Green Constant Current NC LED Modules, using just a single stroke for a light subtle offering.
Wall Pattern Day. If you're going to do a sign project on a hot summer day you might as well be RIGHT on the beach. All that project stress went away sitting on the scaffolding listening to the seagulls, the crashing of waves, and smell of sea spray. I won't lie, I wanted to just bust out a hammock and go to sleep.
Yes, I was working in Van's....I'm in SoCal, so that's all you need to know!
Westrim Products Graphed Pattern Paper!