Jump to content
Show header slider

ELECTRIC SIGN SUPPLIES
If You're Looking For Premium Electric Sign Industry Components From Trim Cap, LED's, Neon Supplies, Power Supplies, Pattern Paper.  Then Please Visit Our Online Store or Feel Free To Call Us For Inquiries or Placing an Order!!
Buy Now

SIGN INSTALLER MAP
Looking for a fellow Sign Syndicate Company Member For A Sign Install or Maintenance Call?
Click Here

For Sign Company's Who Work As Subcontractors
Before You Work For A National Sign & Service Company You Need To Look At The Reviews Of These Companies Before You Work For Them. Learn When To Expect Payment From Them and What It's Like To Work For Them, The Good, The Bad, The Ugly. Learn and Share Your Experiences Yourself For Others
Click Here

Meet and Greet at ISA 2009 in Las Vegas

manuellynch

By manuellynch
in General Message Board

 Share

Recommended Posts

manuellynch Master Engineer

manuellynch

Posted
Posted

Just wanted to let everyone know that we will be hosting a very large suite at the Mandalay Bay hotel on Friday night for those that need some free drinks, food, etc.

We wanted an opportunity for all the people on this board to meet face to face. We already have a lot of people signed up.

Sign up here: http://www.axiomled.com/isa2009/

Link to comment
Share on other sites
  • Board Patron
Brian Master Engineer

Brian

Posted
  • Board Patron
Posted
Just wanted to let everyone know that we will be hosting a very large suite at the Mandalay Bay hotel on Friday night for those that need some free drinks, food, etc.

We wanted an opportunity for all the people on this board to meet face to face. We already have a lot of people signed up.

Sign up here: http://www.axiomled.com/isa2009/

Is this an eric's the same or different places and times?

Installation & Maintenance Services

Brian Phillips | expresssignandneon@sbcglobal.net | P. 812-882-3278

Express Sign & Neon | 119 S. 15th Street - Vincennes - IN 47591

express%20neon%20sig.jpg

Link to comment
Share on other sites
  • Board Patron
Brian Master Engineer

Brian

Posted
  • Board Patron
Posted
We're going to meet at a bar first from 6pm to 7:30/8pm then go to Manuels

Cool!!!!!

Installation & Maintenance Services

Brian Phillips | expresssignandneon@sbcglobal.net | P. 812-882-3278

Express Sign & Neon | 119 S. 15th Street - Vincennes - IN 47591

express%20neon%20sig.jpg

Link to comment
Share on other sites
  • 2 weeks later...
manuellynch Master Engineer

manuellynch

Posted
  • Author
Posted

Setup the room for this event - we have over 55 people signed up already.

Oh...and the entertainment...whoever comes will NOT forget this evening.

Will be at the highest end suite at Mandalay and you will get to meet some interesting people in the sign industry and have some very "Las Vegas Entertainment"...and trust me - this is like nothing you would expect but is soooooooo Las Vegas.

Sign up if you want to come: http://www.axiomled.com/isa2009/

Link to comment
Share on other sites
  • !llumenati
imanut Master Engineer

imanut

Posted
  • !llumenati
Posted
Setup the room for this event - we have over 55 people signed up already.

Oh...and the entertainment...whoever comes will NOT forget this evening.

Will be at the highest end suite at Mandalay and you will get to meet some interesting people in the sign industry and have some very "Las Vegas Entertainment"...and trust me - this is like nothing you would expect but is soooooooo Las Vegas.

Sign up if you want to come: http://www.axiomled.com/isa2009/

Just signed up - figured I'd come out and look for a job. It'll be a great opportunity to meet some of these folks --------------I'm coming in on Wednesday--saved enough flying in that day to pay for the hotel. Little odd -----------

gn

Link to comment
Share on other sites
  • 3 weeks later...
  • Board Patron
Brian Master Engineer

Brian

Posted
  • Board Patron
Posted
post-1448-1238464187.jpg

The entertainment will be a little on the green side

Dont forget to register - that is the only way you will be able to get into this exclusive party.

http://www.axiomled.com/isa2009/

I think I went out with that gal once!!!! hahah

Installation & Maintenance Services

Brian Phillips | expresssignandneon@sbcglobal.net | P. 812-882-3278

Express Sign & Neon | 119 S. 15th Street - Vincennes - IN 47591

express%20neon%20sig.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Topics

  • Posts

    • Rocco
      Mounting Signs On EIFS

      By Rocco · Posted

      It depends on what's under the EIFS.   If it's plywood under the foam, then toggles are fine for a lightweight sign.  If masonry, we've come to like the titen HD (simpson strong tie brand) anchors or long wedge anchors.   The Titen HD screws are more user friendly than tapcons IMO.   They come in a variety of sizes, sometimes even at the big home centers.   Just check to see if it's densglass (fiberglass wall panels) under the foam.  Engineeners have told us that densglass isn't "structural" and that things need to be thru-bolted with uni-strut (or equal) sleepers across studs inside the wall.  A few years back, we were called out for an emergency call where someone had installed some large raceway channel letter signs to an EIFS wall that had densglass behind.  They used lag screws.  These held for a while but a heavy snow caused them to fail.   And toggles should work with Densglass but again not for any heavy loads.    In any case don't compress the foam too much.  A sleeve (mentioned above) would be needed for whatever the depth of the foam might be, though probably not needed for something light like an ACM panel.   if it's a really small sign, then appropriate exterior screws are usually OK going into plywood.  
    • Johnny
      Fs: New Neon Manifold - $825

      By Johnny · Posted

      Interested in neon manifold for my personal shop 484 862 6095 ask for Johnny
    • Erik Sine
      Mounting Signs On EIFS

      By Erik Sine · Posted

      Toggle bolts
    • PhoenixStucco
      Mounting Signs On EIFS

      By PhoenixStucco · Posted

      Are there any recommendations for the best types of anchors to use for lightweight signs on EIFS?  <a href=" https://www.phoenixstuccocontractor.com/"> Phoenix Stucco Contractors</a>
    • Rocco
      Pepsi logo vinyl colors

      By Rocco · Posted

      Hi   Can anyone tell me the right color red and blue translucent vinyl for the "new" Pepsi logo?  We have a local ice cream spot that recently changed from Coke to Pepsi and we have to replace the graphics on a couple of lit cabinets.   The customer sent me the logo in various formats but it didn't specify the correct colors.   I've searched but keep getting CYMK, etc. for the older logo - 2022 or so.   Thanks!
×
×
  • Create New...